Recent content by Gary

  1. Gary

    Classic master cylinder

    Sorry can you expand on the "pry the brake pads back out"? don't quite understand cheers
  2. Gary

    Classic master cylinder

    Want to try and get better brakes as fed up bleeding and have a lot of travel in in lever, just think that they should be a lot better than they are. They do not give me confidence with this amount of weight!!
  3. Gary

    Classic master cylinder

    Hi Thanks for the reply. It is the front cylinder I am after. Thanks for the link but I have the 2 different part numbers but can not get any confirmation of the one with the larger piston as the dealers say they don't have that info
  4. Gary

    Classic master cylinder

    Hi Folks, Sorry if this has been asked but can't find any info, Does anyone know the part number for the master cylinder that has the larger piston? I believe it is for 2010/2011 onwards. I have a 06 Classic but want to change the master cylinder for the later one am guessing this has been done...
  5. Gary

    Tacho / Rev counter not working

    2006
  6. Gary

    Tacho / Rev counter not working

    Yes all working fine
  7. Gary

    Tacho / Rev counter not working

    No the 2 plugs are different so cant be mixed up
  8. Gary

    Tacho / Rev counter not working

    Hi, I had the speedo and rev counter removed as the previous guy had them the wrong way around and the only thing I did was to disconnect the connectors. Now when you turn on the ignition the rev counter does not do the sweeping and non of the idiot lights work apart from the back light and the...
  9. Gary

    Extra fuel gauge and Trip knob

    Cheers for that. That was what I expected. Re the fuel gauge had another look and discovered that it must have had the gauge in the past but the harness was cut and the end hidden under the yoke and the plug still attached under the tank hence I could not find an "empty connector". A quick look...
  10. Gary

    Extra fuel gauge and Trip knob

    Hi, A couple of hopefully simple (ie stupid) questions, 1. Where is the connector for the extra fuel gauge (Triumph option) that can be fitted to the bars? found the connector for the clock. Is it under the tank(front or rear) or behind a side panel 2. Missing the reset knob for the trip...
  11. Gary

    Extra fuel gauge and Trip reset knob

    Hi, A couple of hopefully simple (ie stupid) questions, 1. Where is the connector for the extra fuel gauge (Triumph option) that can be fitted to the bars? found the connector for the clock. Is it under the tank(front or rear) or behind a side panel 2. Missing the reset knob for the trip...
  12. Gary

    Front master cylinder 06 Classic

    Yes was convinced I did something silly when rebuilding hence I stripped it back but all looked fine. When I rebuilt it took a moment or so to get the master to pressure up with thumb over the outlet and get fluid to come out, obviously air locked a bit
  13. Gary

    Front master cylinder 06 Classic

    Hi, Thanks for the replies. There has been so much fluid thru the system now I would guess there is no where for air to hide lol! I have tried back bleeding as well. I stripped it back down and put back the orginal piston and now have some brakes but they are very poor. Yes I am bleeding on the...
  14. Gary

    Front master cylinder 06 Classic

    High Guy's Have just rebuilt my master cylinder but can't get them bleed. Have tried the old fashioned bleeding with the help of her indoors and also vacuum bleeding but nothing. I took the calipers off and fired the air line in to see if the pistons were siezed. A couple were sticky but all ok...
  15. Gary

    Tail light and indicators not working

    Guys got my new relay and everything is working fine. Thanks for help DEcosse it was invaluable.
See more
Back
Top