For Sale TTS SuperCharger and Crank

So forgive me for stupid Q but if you don't by the crank you would need to mod your own crank to drive the blower ?
can this be done in situ or does need to be out of the motor ?
 
So forgive me for stupid Q but if you don't by the crank you would need to mod your own crank to drive the blower ?
can this be done in situ or does need to be out of the motor ?
Any sentences that contain weld or drill including crankshaft you can bet the crank needs to be on the bench or in a lathe;)
 
Last edited:
So forgive me for stupid Q but if you don't by the crank you would need to mod your own crank to drive the blower ?
can this be done in situ or does need to be out of the motor ?
Yes the normal set up you drill the crank for a 12 mm bolt to for the pulley to drive the blower Fixtures aare now supplied with the kit for the drilling and tapping. His crank which is in my garage was repaired by TTS. Arto bought the blower stuff I have the bike and he gave me a couple crankshafts.

the bike is back to NA and runs a modest 225 hp now

P3150080.JPG
 
Back
Top