Want to Buy Roadster foot controls

[1olbull]

@Paul Bryant
The R3R pegs are lower to the pavement that the Standard or Classic.
How much ground clearance (lean angle) you reckon you lost?

 

[Paul Bryant]

@Paul Bryant
The R3R pegs are lower to the pavement that the Standard or Classic.
How much ground clearance (lean angle) you reckon you lost?

That's hard to say Bull, the stock (original) pegs folded up the first time I went into a corner, these Roadster pegs fold up when I go into a corner, there's no difference And this is with those stupid cornering restricting bolts they have screwed into them as stock removed

And that is an honest answer to your question.

 

[1olbull]

That's hard to say Bull, the stock (original) pegs folded up the first time I went into a corner, these Roadster pegs fold up when I go into a corner, there's no difference And this is with those stupid cornering restricting bolts they have screwed into them as stock removed

And that is an honest answer to your question.

Gratitude for the response, Paul.
I should have measured my original R3R ground down peg height (feelers long gone) before I made the swap to Standard boards.
Me reckons I gained more than an inch ground height.
I know your feelers are disintegrated, so if you could give me a measurement (bike upright) to the lowest part of your pegs, left & right, I shall do the same and we shall both be enlightened.
E-Max rear, 140 front with OEM 12.5 inch 444 shockies.

 

[JohnsoD]

Thanks Paul
Lunatic I'll send a P.M.

 

[JohnsoD]

Sounds like Lunatic may need a different brake line and my system would be a straight bolt on?

 

[1olbull]

Looking for foot controls that are on the rocket roadster. I have a 2005 standard with the mid mounted foot pegs. I would like to purchase or trade someone for the controls that are further back on the bike. If anyone has a set for sale or would like to trade please contact me. Reason Im wanting to do this is because I have the carpenter sidewinder headers, I want to get my leg further away from the headers.

Have you found your R3R controls?
FYI - I have a complete set of rails and controls just without the pegs (which were ground down somewhat anyway) that I could be talked out of since I am never going back to them.

 

[lunatic]

Have you found your R3R controls?
FYI - I have a complete set of rails and controls just without the pegs (which were ground down somewhat anyway) that I could be talked out of since I am never going back to them.

Pm sent

You have any pictures of the r3r controls

thanks,
Kevin