Pcv

Pc5

Hi all, well I disconnected the PC5 and reconnected as normal still light on.Then i used elec grease on all the connections and put it all back together and all worked and light went out this time and has stayed off !. the only other thing i did was to turn the secondaries shaft round and back.
anyway all well now .
cheers
 
That could have done it. The light should go out after 3 or 4 hot and cold cycles of the engine. Otherwise you can use TuneEcu or Tuneboy to disable to the secondaries and turn the CEL off.
 
Hi all, well finally got out for quick buzz round and what a difference, it pulls much better and revs more freely induction noise sounds good too. tors not as loud as i want but i like the look of these cans. so will have to do.
cheers
graham
 
Back
Top