isolating clutch cable from rubbing Windvest?

Hipporider

Supercharged

Joined

Sep 13, 2005

Messages

459

Location

Hobart, Tasmania, Australia

Ride

2005 Rocket 3, 2010 R3R

• May 21, 2009

• #1

My Windvest and clutch cable seem to be abrading each other.

Has anyone arrived at a functional good looking way of keeping the two apart whilst allowing the clutch cable to move as it does?

I am sure there must be some cool billet clamp out there for this purpose?

 

xhdskip

Living Legend

Joined

Jun 4, 2007

Messages

6,656

Location

North of Tulsa, OKLAHOMA

• May 21, 2009

• #2

have you tried www.flipmeisters.com
cable clamps?

 

Hipporider

Supercharged

Joined

Sep 13, 2005

Messages

459

Location

Hobart, Tasmania, Australia

Ride

2005 Rocket 3, 2010 R3R

• May 21, 2009

• #3

Not sure they would allow enough movement of the clutch cable.

 

krothnbrg

.060 Over

Joined

Apr 23, 2008

Messages

110

Location

Blossom Valley - San Jose, Ca

Ride

2008 Triumph Rocket III Standard

• May 21, 2009

• #4

Odd... I have the Windvest and I don't have this problem. The clutch cable moves freely with zero touching of the windscreen.

 

xhdskip

Living Legend

Joined

Jun 4, 2007

Messages

6,656

Location

North of Tulsa, OKLAHOMA

• May 21, 2009

• #5

tried rerouting it?

 

Hipporider

Supercharged

Joined

Sep 13, 2005

Messages

459

Location

Hobart, Tasmania, Australia

Ride

2005 Rocket 3, 2010 R3R

• May 21, 2009

• #6

Then it rubs on the outside on the Wvest! Karl, I am curious hw you route your cable so that it doesnt rub on the W/vest.Any chance of some photos?