DIY O2 sensor eliminator

[charliebarnwell]

Hi Guys, some time ago I came across a post that had pic's for a DIY resistor mod to eliminate the O2 sensor, I think it used 300 ohm resistor. Have been searching for a month now and cant find it again, can anyone point me in the right direction.
Thanks
Charlie

 

[RatBoy]

Do you mean eliminating the O2 sensor?
http://www.r3owners.net/trading-tunes/6182-o2-sensor-plug.html

Do you mean the resistor mod to bypass the factory power reduction?
http://www.r3owners.net/general-tech-talk/5405-what-if-resistor-mod.html

 

[charliebarnwell]

diy-o2-sensor-eliminator

Definitely an O2 eliminator, I have TORs and DeCat box and K&N which is giving me a load of popping on Decel. Was informed that removing the O2 sensor will cure it!
Somewhere I have seen pictures of the plug with 300 or 330 ohm resistors across the wires, but can find the post or remember which wires, sods law eh

Thanks
Charlie

 

[Pig9r]

I have not seen a DIY O2 eliminator. The only one is from Dynojet. To eliminate the afterfiring you will also need Tuneboy or PCIII, eliminating the O2 sensor won't do it alone. It afterfires because it is running lean.

 

[xhdskip]

If you eliminated the O2 sensor,
how would the computer know how rich or lean you were running,
and what signals to send for the adjustment.