Search results for query: *

  1. wzuccarello

    Sidewinder exhaust noise tamer!

    My tuned Roadster is scary fast but the open Carpenter megaphone is just too loud for comfort. Carpenter baffles are rare and expensive so I tried something different. I jammed a 2 1/4×14" glass pack in the megaphone and secured with exhaust Springs I also tightly packed three copper pot...
  2. wzuccarello

    Instrument lamp replacement issue?

    Have to replace the tachometer to fix a failed lamp?
  3. wzuccarello

    Instrument lamp replacement issue?

    Light ins doesn't work on the tachometer.
  4. wzuccarello

    Instrument lamp replacement issue?

  5. wzuccarello

    Instrument lamp replacement issue?

    Hello all! Can anyone tell me how to remove the rectangular rubber instrument lamp socket from the tachometer? I've tried and pulled to the point of being very close to breaking something lol.
  6. wzuccarello

    Stepper motor regulation problems

    Thanks, I have a genuine Triumph manual. Also had to use the Toyota motor backplat This was exactly my problem! I had to use penetrant and pliers to loosen the idle linkage section on the throttle shaft above the stepper motor. It was stuck and keeping the butterflies from completely closing...
  7. wzuccarello

    Stepper motor regulation problems

    I was wrong, Triumph and toyota starter will turn both ways with pliers.
  8. wzuccarello

    Throttle linkage issue causing high idle.

    This also fixed the stepper adjustment issue.
  9. wzuccarello

    Throttle linkage issue causing high idle.

    Ok, I found the problem! The inner and outer throttle bushings above the stepper were fused together. They are supposed to move separately very slightly and have a little clearance about 1mm in the end plate dogs, that you can feel when you push the lever with the roller, and spring returns...
  10. wzuccarello

    Stepper motor regulation problems

    Yes the Triumph starter gear only spins one way with pliers. I do know to change out the nose of the Toyota starter. I do suspect a bad TPS. Thanks for the reply.
  11. wzuccarello

    Stepper motor regulation problems

    Thanks. I adjusted the stepper nut all the way off and couldn't get the stepper numbers to change much. Also same thing with another stepper motor. I need at this point to get it running and sync throttles and adjust tps a couple times to get it dialed in. Toyota starter arrives tomorrow!
  12. wzuccarello

    Stepper motor regulation problems

    I'm having similar problems as the OP. How do I apply the stepper motor for step 2?
  13. wzuccarello

    Stepper motor regulation problems

    Hello, I am having trouble with this spot. My throttle linkage is like the red circle picture. How or what needs adjusted to get linkage to match the picture with green circle?
  14. wzuccarello

    Throttle linkage issue causing high idle.

    I recently found this picture here and I'm having a problem here that is causing 2000 rpm high idle with my basketcase 2018. Previous owner messed with linkage, causinghigh idle. On my other rocket which runs fine there is a slight clearance where the green circle and I can push the lever with...
  15. wzuccarello

    Starter upgrade issues

    Never mind, I found it. Thanks.
  16. wzuccarello

    Starter upgrade issues

    Hello, I need to replace mt starter so I've been looking at old posts for information. Can you post a link or tell me where to find your video please?
Back
Top