Search results for query: *

  1. Tune on R3 Touring

    Does anyone on this list have a Rocket III Touring and a TuneBoy cable. If so please email me at support@tuneboy.com.au

  2. Tuneboy and idle issue

    Hi The TuneBoy tunes based on 20145 all have the stalling fix in them, it does not matter if your dealer installs the tune or you do with the TuneEdit software. If you are using a tune that is based on 20050 I would not worry about the update unless you start to have stalling problems. If...

  3. Unifilter update

    I think I have said this a hundred times. Triumph use the same map for the USA, Europe and Australia if the model of bike is the same. The maps we have done for the Rocket have more fuel than the standard maps from Triumph. If you see a lean condition have a look at where the sniffer is...

  4. Unifilter update

    Can you email me the dyno run file. Thanks Wayne

  5. Pod filters under the bear claw (Dyno results)

    This bike had already been tuned with the standard airbox and k&N filter so I just did four runs to get a baseline before the filter change. The best the dyno showed was 141.4 hp. I then fitted the TuneBoy pod filters (under the bear claw) , added fuel over the upper part of the rev range and...

  6. aftermarket pipes

    The TuneBoy software can remove the pop on decel. Most of the pop comes from the middle cylinder and all you need to do is add some trim to the fuel for that cylinder.

  7. i really want to go with tuneboy but........

    Hi. Have you tried the PCIII overlay with the latest TuneEdit.exe The first release of the program for the Rocket did not load the PCIII maps correctly, this is fixed now. The ECU cannot change the map to unlearn anything, the ECU does have an adaption that is done while in closed loop. I know...

  8. TuneBoy

    The great thing about the Rocket III is that Triumph make it slower than it should be. With something like the Daytona the remapping process will give you more power, but as Triumph have attempted to get the mapping right and have only cut back where they have to for emission rules, the gains...

  9. TuneBoy

    Yes, the circuit board I am waiting for is one I have designed to connect between the diagnostic connector and the USB port on the PC. This is for the bikes with the Keihin ECU. The current TuneBoy cable will work but the download speed will be slower. Because of this I think the new cable is...

  10. TuneBoy

    All I did on Rocket Junkies bike was set the secondary butterfly so it is fully open in all gears and copied the 3rd,4th,5th gear ignition map into the 1st and 2nd gear ignition maps. This gave him full ignition advance in all gears and the ability to give it full throttle when he wants (rather...
Back
Top