Search results for query: *

  1. warp9.9

    Throttle Cables Binding?

    Ok I'm just jumping in here Think of down on the throttle body as course adjustment and the two adjusters at the top are for fine adjustment as things stretch and chand a little. Much like the clutch has the course adjustment at the bottom where the cable mounts and fine adjustment up top at...
  2. warp9.9

    Throttle Cables Binding?

    Fine adjustment up top the rest below down by the throttle body mounting bracket where you check the cable freeplay. This is a push pull system messing with what people mistake as a idle stop screw and incorrect cable freeplay binds the stepper motor controls leading to people thinking they are...
  3. warp9.9

    2005 ignition switch removal

    I just checked a couple of my bikes they are security break-off bolts one time used and the head twist / breaks off. Thats why I reverted to my inner Machinist 🙃
  4. warp9.9

    Triumph Rocket 3 Sidecar Kit Brings Retro Art Deco Style

    5500 a older 07 tourer. Durn thing is only 5 miles from me 🤔
  5. warp9.9

    2005 ignition switch removal

    Exactly I unscrewed mine using a prick punch and changed them over to standard Allen hex style.
  6. warp9.9

    2005 ignition switch removal

  7. warp9.9

    2005 ignition switch removal

    Yes they are security torx basically a torx with a hardened pin in the middle. Some people call the pin torx.
  8. warp9.9

    Did I just mess up my cam cover?

    Actually color does not matter. Early years pre Roadster had better cam covers I have both black and chrome and neither has ever leaked. And I've reused the gasket more then once. But the old cover surrounds and holds the gasket in the correct location. So it doesn't squeeze out. Spark plug...
  9. warp9.9

    TPS and stepper motor issue

    You need the tune ecu software to set the TPS voltage. It tells the ecu to fully retract the stepper motor shaft prior to setting the voltage. Plus handles the adaptation cycle program.
  10. warp9.9

    Operation Blackie

    Wow that's a non updated engine from the looks of the detent wheel and a 04-05 series clutch. For safety if I were you I'd drop the sump pan for cleaning and inspection. It would suck to put her all back together and ride around wondering how the torsional damper bearings were holding up. Just...
  11. warp9.9

    2014 roadster parting out

    Ya just curious If my memory is still there I believe Steel broke his exhaust cam on his carpenter roadster. I didn't know of you had the cam cover off or not yet.
  12. warp9.9

    2014 roadster parting out

    Hey Herman have you pulled the tensioner out of the engine yet. I figured it wouldn't matter with the bent valves. I'd be curious to look in the hole and see if there is a shoe on the cam chain guide ?
  13. warp9.9

    Torsion damper

    Easiest way to check the torsional damper bearings is to drop the sump pan and clean it. The pan gasket is cheap and you can clean the sump screens while you are at it. If there's a problem you'll see the shrapnel all around the rear sump screen. If there's nothing there you didn't waste your...
  14. warp9.9

    Eastern Rally July 2026

    Burkes garden is beautiful but its call God's Thumbprint. Road that area it has Amish community you'll see horse drawn buggies down there. Now a little more west over by Duffield Virginia is the devils bathtub.
  15. warp9.9

    Eastern Rally July 2026

    I believe they stayed at the Fancy Gap Cabins. Here 202595 Blue Ridge Pkwy, Fancy Gap, VA 24328, I've seen pictures where we had breakfast and I did a little work on Lupe silver 05 Rocket it was a dark side set up. Joey Flecther and met up and road out together. We were ruffing it in the motel...
  16. warp9.9

    Eastern Rally July 2026

    I'm jealous!!!!!
  17. warp9.9

    Eastern Rally July 2026

    Is that your sister that makes the Menudo???
  18. warp9.9

    Gearbox rebuild question

    Yes the shoulder version of the spline bushings do replace the original two piece style.
  19. warp9.9

    Crazy ignition skip under load

    If you leave the flat plate off the number one coil the coil becomes accessible. All the plate does is hold twice wire connector mounts. With out them the wires will still lay in there like they are supposed to. The only difference is you'll be able to access the #1 coil . The connectors do...
  20. warp9.9

    Clutch Arm Went Limp While Changing Cable — Can I Fix This Myself?

    Hey bud been pondering your post a bit and I keep asking myself did he break the lifter piece or the lifter shaft. The so called return spring is more there to keep contact pressure between them two components low for lubrication. So I'm assuming from your post you did not remove the clutch...
Back
Top