Search results for query: *

  • Users: dd14x
  • Order by date
  1. dd14x

    how to remove gear shift pedal?

    Thanks. Here's what worked out - I removed the 23Nm bolt, and then, carefully removed the thin spring like clip under that (next to the ball joint). Then, the shaft just slid out from the hollow ball joint
  2. dd14x

    how to remove gear shift pedal?

    Thank you - it is the quick shifter. So how do I remove the 8Nm linkage below the 23Nm one? Or do I have to remove the bolt that Journeyman had put a red arrow against?
  3. dd14x

    how to remove gear shift pedal?

    Sorry to resurrect this old thread, but I need to remove the gear shift lever on my 25 Storm GT (to take measurements to fabricate a heel/toe shifter) - but I have the TSA installed, so I can't remove the bolt you had marked with the red arrow (don't want to undo the TSA wiring). Is it possible...
  4. dd14x

    Good choice for crash bars for my 23 GT

    Thank you. Was it a relatively easy fit? Or did you have to modify the guard in any way?
  5. dd14x

    Mount passing light on front mudguard bracket

    The supplied bolts are 5mm short. Will need to order some bolts now - attached pic shows the new mount (and the light currently on the fork)
  6. dd14x

    Mount passing light on front mudguard bracket

    Thank you. Mine is the new one, so this is not easily done. I ordered the part I mentioned in my earlier post - will share pics (if it works) later this week :)
  7. dd14x

    Mount passing light on front mudguard bracket

    What size bolts did you use? And looks like it is bolted using one bolt - any issue with it rotating unintentional?
  8. dd14x

    Mount passing light on front mudguard bracket

    Hello, has anyone mounted something like the item linked to below, onto their rocket 3? I know Journeyman had managed to convince Clearwater lights to make a custom bracket for him, but I was not able to convince them - so looking for alternatives :) This looks like it should fit - I just don't...
  9. dd14x

    Remove TFT cluster to fit Evotech Quadlock mount?

    Maybe this? Tinted Flyscreen...
  10. dd14x

    Remove TFT cluster to fit Evotech Quadlock mount?

    M4
  11. dd14x

    Remove TFT cluster to fit Evotech Quadlock mount?

    One note - the chigee mount came with 16mm m5 bolts - those were too short. I had to get 20mm m5 bolts instead. I reported it to evotech. Also, once the mount was attached to the display, it was hard getting to the Allen bolts (in the picture) to reattach to the motorcycle. I had to use...
  12. dd14x

    Remove TFT cluster to fit Evotech Quadlock mount?

    As I was typing my response, I knew someone would ask... :) I'm pretty sure it was metric, but I do not remember. I will check in a bit and reply. Here's a pic in that meantime
  13. dd14x

    Remove TFT cluster to fit Evotech Quadlock mount?

    Step 1: Put the hammer aside :) It is relatively easy. Do you have allen wrenches? You will need it. Look under the display from the left and the right side - you will see one allen head bolt on either side. You need to remove those, and then the display will lift off. The display is a little...
  14. dd14x

    Paint damage under passenger seat

    Paint protection film - clear plastic wrap
  15. dd14x

    Paint damage under passenger seat

    Thank you. I put some clear XPEL PPF on. Hopefully it will stay in place
  16. dd14x

    Paint damage under passenger seat

    Noticed today that the paint under the rear passenger seat has some serious scuffs from the rubber "feet" under the passenger seat. I polished those out, but it is going to happen again. Thinking about putting some PPF on the fender under the seat - has anyone else noticed this (any other...
  17. dd14x

    Rocket is not a motorcycle one can ride in shorts

    I installed this kit Heat Shield Liner - 2020-2025 Triumph Rocket 3 - works well My earlier post in thread 'Heat Shielding Experiment' Heat Shielding Experiment
  18. dd14x

    Just got a 2025 Rocket 3 R Evil Keneivel

    Understood - any chance you could take pictures of the two parts and where they are mounted?
  19. dd14x

    Good choice for crash bars for my 23 GT

    Is this something you have installed on your rocket? Pics?
  20. dd14x

    Things I've noticed riding in the cold.

    You have mids and front pegs?
Back
Top