Recent content by unforgiven

  1. unforgiven

    Tires: Metzler vs. Avon vs. Bridgestone

    Hi Triumphil. A little late, but I read about the tyre stuff just now. My question and maybe the issue for my right choice of tyres is the torque/hp of my supercharged Rlll ( 345/ 306 backwheel): don't they- Avon front, Extra Max back- come off the rim at top accelerating /speed? Tnx for your...
  2. unforgiven

    needing Rlll stock ignition timing

    high there. Who can inform me about the Rlll stock ignition timing. How many degrees advance for example. Thanks !
  3. unforgiven

    broken steelplate clutchbasket

    Mine is a 04 one and yes, there is/was 'some' torque anyway. The plate I mean is just the only one that's hardly to be seen, pressed between the big gearwheel(s) and the basket. ( as you spoke about stell "plates", plural) By the way, also the squair 'holes' with the thick shock absorber springs...
  4. unforgiven

    broken steelplate clutchbasket

    I have an issue with the thin steelplate between basket and its gearwheel. it has been stock fixed together and the only (temporarely) solution for that problem is buying a new stock basket. is there anywhere on this planet ( exept for China, I'm sorry) a stronger basketunit to get ?
  5. unforgiven

    TTS cnc milled chargerbracket

    ok. I shall contact TTS and ask them about the adaptability of the newer drive style into the standard cover. I don't think so but still asking them doesn't cost much, till then.
  6. unforgiven

    TTS cnc milled chargerbracket

    Your guessing is right! And tnx for your info !
  7. unforgiven

    TTS cnc milled chargerbracket

    Hi, did anyone had some problems with the TTS chargerbracket/cover ? What about the crankpulley bearingconstruction behind the crankpulley? Did TTS fixed any modification about that item with its bracket? If someone knows, please let me know. Tnx !
  8. unforgiven

    My Rocket is broke

    Outriders : To be sure, check if the wireterminals(plus & ground) are surely locked on the battery. Check also the batterycase is still fixed steady at the frame. Was there any solding at the terminals in the past? Possibly the solder did eat the insite of the wire(s) meanwhile.
  9. unforgiven

    TunECU 2.5.5 backup does not succeed……..

    My injectors are Siemens Deka 80 lbs and they did/do function ok all the time. As I mentioned before, the boost pressure was before about 20.0 psi at 7000 revs and AFR 11.0 was ok at those revs, better 10. Also 20.0 in the plenum/boost gauge and the bike is running with forged pistons 9.2...
  10. unforgiven

    TunECU 2.5.5 backup does not succeed……..

    Warp, thank you for your quick respons. The bike( model R3 2004, not the Classic or Touring) was running ok before installing an original PC 5 (the PC5 for R3 Touring '09-'11 was ok for model 2004 so a well known shop- Dynojet.com- told me.) After installing , some fine adjustments on the Dyno...
  11. unforgiven

    TunECU 2.5.5 backup does not succeed……..

    hey guys. I have a big issue with the tune boy file for my R3 supercharged fat lady. Normally the revs limiter was coming in at 7000 rpm but after installing only the Powercommander V device suddenly the revs limiter is coming in each time at 6250 ( testing on the Dyno in 4 gear and once in 3...
  12. unforgiven

    New Rotrex C38-91 Supercharger

    eating up the spigot Warp 9.9 ,Oeps, I was very lucky I think. I discovered the problem when I was dismantling the engine in order to make some fitting of Je pistons and cams.It was indeed a slight leaking of the oil seal but the unit was already floating in de cover...:eek: I shall contact...
  13. unforgiven

    New Rotrex C38-91 Supercharger

    charger crank sealunit Hi warp 9.9, I am using the TTS version unit, also that version which 'Umbro' showed before in this thread with a picture of a chewed up one . Also the adjustable unit with the pinn roaler bearing and seal. I asked him about his better version but no reaktion of the guy.
  14. unforgiven

    New Rotrex C38-91 Supercharger

    crank driver TTS Hombre, I have the same problem with the crank driver. It's partly broken and leaking. Is it possible for you to deliver me your version of that part ? Tnx !
  15. unforgiven

    It's a bike, but not as we know it...

    Oh, and those rods coming from the fender are indeed for supporting the exhaust cans. The taillight is temporarely fixed. Indeed a led light will looking better 'in line'
See more
Back
Top