Kiwicol's latest activity
-
Kiwicol replied to the thread Lube the splines....I was told the part number T3201277 is a Stud: M12 ENC SLV. The ENC part stands for encapsulated and the SLV stands for Silver. I'll... -
Kiwicol replied to the thread Lube the splines....I went off looking for possible replacement studs (T3201277) and I noticed the cap nut wasn't on the list of parts. I then find out...
-
-
Kiwicol replied to the thread Lube the splines....Some more pic's of the jig in case anyone is interested.
-
-
Kiwicol replied to the thread Lube the splines....Took it for a wee ride down the road, just to make sure I'd done everything up and to check for the noise. Only go to about 30kph and no...
-
Kiwicol replied to the thread Lube the splines....Thanks guys. i cleaned up the studs and put some blue loktite on them. Went back together in about 3 minutes by myself. That jig holds...
-
It would probably work but you got to ask your self why they didnt just use bolts if securing it like that was good enough. I couldn't...
-
The drive shaft will flop around when you have it disconnected and while trying to re-engage it with the final drive. I doubt that is...
-
That makes a lot of sense. It's a lot less wear and tear on the aluminum female threads since in theory, the studs are not supposed to...
-
Kiwicol replied to the thread Lube the splines....I pulled the front off and out as well, bit of crud in there and stones. They've been flicked up off new seal and found their way into...
-
Kiwicol replied to the thread Lube the splines....Hey guys, I'm doing the spline lube thing and also trying to track down a grinding noise, think I found it too. Couple of questions...
-
-
Kiwicol reacted to NicholasRocket92's post in the thread Bike power button not working anymore apparently... with
Like.
That's what I'm planning to do next. I will update what I find. -
Kiwicol replied to the thread Bike power button not working anymore apparently....It sounds like corrosion on the power button contacts to me. That's a disassemble n look job.
-
Do you have the correct OBD 2 reader. A generic one will not work. I have a 2025 rocket and use the OBD Link MX+ OBD reader. It clears...
-
Kiwicol replied to the thread 2025 Storm ECU questions....Here are the pic's from under my seat. Ignore the square box thing in the middle, it's an add on I put in there.
-
-
Kiwicol replied to the thread 2025 Storm ECU questions....There is an OBD11 connector under the seat. It's attached to a length of cabling and is positioned on the right side of the under seat...
