Gerald's latest activity

  • Gerald reacted to Kiwicol's post in the thread Lube the splines... with Like Like.
    I was told the part number T3201277 is a Stud: M12 ENC SLV. The ENC part stands for encapsulated and the SLV stands for Silver. I'll...
  • Gerald reacted to mo8414's post in the thread Lube the splines... with Like Like.
    I don't think it comes with the nut since its not listed as coming with the nut and when you look up the diagram for the stud, it never...
  • Gerald reacted to Kiwicol's post in the thread Lube the splines... with Like Like.
    I went off looking for possible replacement studs (T3201277) and I noticed the cap nut wasn't on the list of parts. I then find out...
  • Gerald reacted to mo8414's post in the thread Lube the splines... with Like Like.
    Making that jig was a good idea. That takes a lot of the hard work out of the job. I'll probably make one next time I do it. Glad to...
  • Gerald reacted to Kiwicol's post in the thread Lube the splines... with Like Like.
    Some more pic's of the jig in case anyone is interested.
  • Gerald reacted to warp9.9's post in the thread TPS creep. with Like Like.
    It was done to take bind away from the TPS when it got set and tightened down. This started right before they had the new blue innards...
  • Gerald reacted to Journeyman's post in the thread TPS creep. with Like Like.
    @warp9.9 who has given me tons of excellent advice in the past...
  • Gerald reacted to TURBO200R4's post in the thread TPS creep. with Like Like.
    Do not carve this into stone I have never had this problem But I think what happen is that someone thought that the inside of the tps...
  • Gerald reacted to RockOn's post in the thread Torx Hatred with Like Like.
    Ok, will give that a go first. If no go, then Dremel an X and use my impact driver. Good grief. I'm too old and lazy for this SH*T!
  • Gerald reacted to TURBO200R4's post in the thread Torx Hatred with Like Like.
    You can try to hit the bit with a hammer a few times to jar it loose. You can buy an impact driver that you can turn to left while you...
  • Gerald reacted to Rick111's post in the thread Anybody at sturgis??? with Like Like.
    Most are these days , we have met the enemy and it is us.
  • Gerald reacted to Dr.D's post in the thread Anybody at sturgis??? with Like Like.
    The area is dangerous when full of people.
  • Gerald reacted to Bob R's post in the thread Anybody at sturgis??? with Like Like.
    I was there in 1975 on a brand new Norton 850 Commando MKIII with the extra weight the electric (non) starter gave me. ;) I have...
  • Gerald replied to the thread TPS creep..
    Thanks, got bike apart so will try that when reassembling. Do you make shim full circumference of tps? I still don't understand where...
  • Gerald reacted to Journeyman's post in the thread TPS creep. with Like Like.
    You cut a small piece of aluminum from a can (something acceptable, I would hope) that goes between the TPS and the bike to shim it. The...
Show older items
Back
Top