Recent content by dougl

  1. dougl

    Chasing gremlins

    This makes sense. You should be able to use BT to see diagnostic. The Lonelec cable will definitely work. The specification is KKL protocol with an FTDI chip. I have this cable from Amazon. You could try it for $20.
  2. dougl

    Chasing gremlins

    This is from the custom map section. Do you have the stock 20352?
  3. dougl

    Chasing gremlins

    Still confused. When you installed the program for windows and opened Tuneecu in the map screen, you got a screen than said no map loaded. Then you would have to go to the ecu tab and hit connect. When you connect, the box at the bottom next to tps flashes green. Then you would hit read map to...
  4. dougl

    Chasing gremlins

    You can’t download stock maps from Tuneecu.net. You have to buy the Android version and you can download maps in the app.
  5. dougl

    Chasing gremlins

    This link has instructions https://tuneecu.net/TuneECU_En/mapedit.html
  6. dougl

    Chasing gremlins

    There is a map loaded. 20352. I’m confused about how you got those screenshots. Did you read the ecu with Bluetooth? That’s not supposed to be possible. The f-trim table with the zeros is a way to increase or decrease fuel in the fuel tables. You displayed the main (F) fuel table. You already...
  7. dougl

    Chasing gremlins

    If your bike has production silencers, the map is 20352 for vins up to and including 574812 or 20773 for vins 574813 and after.
  8. dougl

    Chasing gremlins

    This is from the basic guide for the Android version on Tuneecu.fr, bikes list: read and write USB only
  9. dougl

    Chasing gremlins

    You can read and write but only with the cable. There is a manual perhaps on Tuneecu.net, downloads. I could email it to you.
  10. dougl

    Chasing gremlins

    It would be nice to load the stock tune
  11. dougl

    Chasing gremlins

    Looks better! The throttle bodies are significantly out of balance. The differences should be no more than 10hPa.
  12. dougl

    Chasing gremlins

    I hadn’t looked at his screen shots. So you’re suggesting that all of the map tubes are all leaking badly and seeing virtually no vacuum? Or maybe the sensor is broken. They’re certainly out of balance. In the earlier Roadsters, the F-L switch is at 31% throttle so it would be running really...
  13. dougl

    Chasing gremlins

    At idle, the mixture is controlled by the stepper motor through the isc valve, no?
  14. dougl

    Chasing gremlins

    You need the cable to load maps.
  15. dougl

    Chasing gremlins

    There’s an adjust iscv thing I believe under tests.
See more
Back
Top