Uclear

vanguard138

Living Legend
Joined
Jun 1, 2012
Messages
2,292
Location
Northern Michigan
Ride
2013 Rocket III Touring
Just ordered the Uclear HBC200 from Revzilla for my Schuberth C3 Pro. They have the price lowered and I had some zilla cash to spend too. Really like the technology, just hope the speakers are a good fit in the Schuberth.
 
Came yesterday and I updated the firmware today. I linked my HTC One to my Garmin 665 and then to the Uclear with no issues. The issue arises with the Shuberth neck roll. When you attach the unit to the helmet the nexk roll can not be put back in with a complete seal. I am not prone to cutting the rubber seal to allow the neck roll to fit dlush. I would have the same issue with a Sena SMH10.

I do have the unit running with the GPS pumping out music to see how long the battery lasts. Speakers really sound good.

Any suggestions?

Anyone who has one of these units, Ogre I know, there are firmware updates available feom Uclear.
 
Rick, You need a notch. I can't tell you where, without seeing your particular helmet. I will add some pics to this post in a few minutes.

My Scorpion helmet had no accommodation for Bluetooth, so I notched the rim plastic.



T's Nolan, had a piece for the Nolan communication system, which I notched.


Hope that helps.
 
Last edited:
Thanks. I see you used the adhesive mount also. No adhesive mount in my kit so I will contact Uclear. I used the clip. A bit apprehensive about notching an 800 dollar helmet, especially if after a few hours on it becomes uncomfortable.. But that is a solution.
 
You must log in or register to reply here.

Similar threads

UCLEAR HBC200 FORCE DUAL PACK BLUETOOTH HELMET COMMUNICATOR
2
Replies
18
Views
4K
Bob T
Menu
Log in
Register