Rocket 3 Upgrades - Queensland, Australia

Headlights- I have a ‘22GT and the headlights are pretty darn good. I have read that some people overseas have a different switch than we have here in the US. Running lights? Ours are on low beam all the time and then we can switch to high beam. Those are the only choices and they work very well. They are very easy to adjust, mine were off. Maybe somebody with that running light switch can comment.

Seating- I have a Corbin heated seat and I like it better than the stock one. It’s weird because it feels firmer but on longer trips, it is much more comfortable. One of my best purchases was heated gear. Gloves, socks, pants liner and undershirt. It is somewhat expensive but worth it to me because I added 2-3 months of riding to the year and riding very comfortably. I do not ride any more when the temp dips below 40°F. Long story but six broken ribs, lacerated spleen and a cracked vertebrae made me set some parameters.

Suspension- The front forks are fine, no issues whatsoever. That rear shock is a problem. It should have been the first thing that I changed out. I got a very good deal from EPM Performance on a Wilbers 643 COMPETITION QS shock because they were having problems sourcing parts on a cheaper shock and offered the upgrade because I had been patiently waiting. A big bump is still a big bump. It is not going to turn our bikes into a Goldwing. But it doesn’t float after that bump and corners are where it really shines. Especially rough, bumpy corners. Huge difference.

Can’t help on the windshield, I can cruise around 80mph and it doesn’t bother me.

For power, the headers are undersized because of Euro 5 restrictions. I am waiting on a Paul Bryant/Viking exhaust system with 2 inch pipes. I will be selling my Vandemon slip-ons. Penner dynoed tune.

I trust some of this helps.
 
I believe that those Eagles only fit the older Rocket IIIs. I had some on my Roadster and they were a big improvement.
There are a lot more parts for the older Rockets out there that have yet to be manufactured for the newer models, so always check to make sure which model they are referring to.

I think the 2.5s have sealed units. I hope I'm wrong, as changing the bulbs would be an easy way to make an improvement, but let us know....

 
Nashvegas said:
I got a very good deal from EPM Performance on a Wilbers 643 COMPETITION QS shock
Click to expand...
Did you get the hydraulic pre load adjuster? Does it look like there is room on our bikes for the hook wrench, if you get the manually adjustable pre load?....Also, does that shock have high and low speed compression adjustment? If so, did you try to take out all the high speed compression to see how that effected the big, sharp, square edge, hard hits? Which is my only real complaint with the rear suspension on this bike. Just wondering since you said "big bump is still a big bump"
 
Last edited:
Yes, there seems to be room for the hook wrench. They asked a bunch of questions to gauge what they thought were good settings and I have not changed that factory setting. High/Low compression and rebound all feel like they are spot on. A big bump is not nearly as sharp as stock and the “floating” feeling is much less pronounced. I will try taking out the high speed compression and see how it reacts. I know where to find some pretty big bumps around here.
 
Cool, thanks. It 'll be a while before I have the money for a shock anyway. I just picked up my Vandemon manifold from Cerakote.
 
Yes, there seems to be room for the hook wrench. They asked a bunch of questions to gauge what they thought were good settings and I have not changed that factory setting. High/Low compression and rebound all feel like they are spot on. A big bump is not nearly as sharp as stock and the “floating” feeling is much less pronounced.
rick danger said:
Cool, thanks. It 'll be a while before I have the money for a shock anyway. I just picked up my Vandemon manifold from Cerakote.
Click to expand...
Those look really nice! I like the sound of my Vandemons. I rode 165 miles today. I took out 6 clicks of high-compression and it made a big difference on softening up the big bumps, in fact, the front started feeling more harsh than I had ever noticed. 6 clicks is a large adjustment. It felt pretty good in corners, maybe a little “squishy/squatty” and a bit disconnected from the front but if I wasn’t such a hooligan I could probably adjust the front for a nice, comfy ride. After about 50 miles I had the brilliant idea that 6 clicks off of the low-compression might be interesting. It was, and not in a good way. I don’t think that I ever bottomed out but it was bad. The front end just said, “I don’t know what you guys are doing back there but I want nothing to do with it.” I didn’t even go 5 miles before I added that 6 back on.

At about 100 miles I added 4 clicks back to the high and that’s where I left it. It feels pretty good. I might play with the rebound a bit and see where that gets me. It has the same 0-22 click range as the high-low and I don’t know where EPM set it.
 
Nice. doesn't cost anything to click away and experiment. I think I'll try that shock when the finances can stand it. Nothing ventured, nothing gained.
 
Awesome details @Nashvegas - helps a lot.

Don't like the sound of your incident...

I've looked into the Wilbers 643 in Australia: with additional external preload adjustment it comes in at AU$3136 - AU$2,480 without (preload adjustment via shifter only)...

Have to chew on that one a little... but he gave me another option:

A Nitron Race Pro shock, coming in at AU$2390 with the preload, AU$1,895 without...

The guy told me Wilbers are pretty much top of the line, but suggests the Nitron is pretty similar. People buy about 50/50 between the two. Similar except in warranty: Wilbers offers unlimited miles, Nitron limited to 25,000km (~15,600 miles).. both are 5 years.
Anyone hear anything on the Nitron?
 
AshMan333 said:
The vandemon headers and werks tip make a great combo
Click to expand...
Those Vandemon headers look great - got two choices here - S/Steel @AU$990, and Titanium at AU$1,490...

@AshMan333 - have you got a set of these along with the Werkes slip on?
Assuming you got it tuned and dyno'd - what sort of outputs are you getting with that set up?
 
Last edited:
You must log in or register to reply here.

Similar threads

Hi for South Australia
Replies
6
Views
441
Kea
New Member from Canberra, Australia
2
Replies
10
Views
796
GhostRR
New Member from Melbourne Australia
Replies
8
Views
634
Spooled73
New Member New South Wales, Australia
2
Replies
11
Views
883
RugbyRef
New R3 Owner Australia
Replies
7
Views
583
Kea
Menu
Log in
Register