Engine Management Light

Hayabusa

Supercharged
Joined
Feb 7, 2009
Messages
210
Location
Skegness UK
Ride
Hayabusa/Rocket3T
Hi need help have just fitted some wally lights (not wired into the loom just to a switch and the battrey)when it was all back together turn the key and press start and away she went
BUT the management light was still on ?
Have looked in the hand book some thing about limp home mode ,still seem to run OK apart from the fuel gauge reads 0 any body got any ideas on the reason .
Will have to take it to the shop if not.
Paul
 
http://www.r3owners.com/viewtopic.php?t ... ment+light

biker1059 said:
Mine light came on when I undid the resistor mod. The dealer told me to turn the key on and off through 7 cycles, it worked.
Click to expand...


http://www.r3owners.com/viewtopic.php?t ... ment+light
 
It looks like you have an R3T. If so, did you turn the key on to test the lights before you plugged your instrument cluster back in? If yes, that's what set the error, it will go away after a few cycles. If no, you'll need something to read the error code to determine your problem.
 
Thanks Johnathan that did the trick still no fuel light but am due to fillup soon so hopefully that will come back to.

The lights are fitted (on rad cowl) and working am going to get a plug for the bar switch only £5 here may fit the other set on the screen.

Paul
 
glad it worked for you.

you're going to install both sets of lights?

I thought about getting another set, mount them both to the radiator shroud. Point one set ahead to see the road better, angle the other set out to watch for deer. I haven't decided for sure yet though.

Let's seem some pics if you put both sets on.
 
both set on the bike looks good just have to decide how to wire them up would like to put two switches so i can use them as and when, also need to find some waterproof plugs so i can remove the screen .have tryed most of the bolts on the screen and have decided on the top outside ones will post some photos in the next day or two. :shock:

we do get deer here but mostly rabbits get in the way ----


fuel gauge working again
 
I ran mine to the aux. light switch on the bike.
if I put the other set on, Im probably just gonna splice the wires so they run off of the same switch.
 
Photos as promised took me allday to get them on here, not wired in the top ones yet but like the look them there......






Needs a wash
 
You must log in or register to reply here.

Similar threads

Engine light staying on
2
Replies
13
Views
552
Tripps
Storm Gt hill hold not available and engine light on.
2
Replies
11
Views
763
Kiwicol
Back light problem
Replies
7
Views
55
TURBO200R4
Neutral light
2
Replies
10
Views
803
TURBO200R4
EML on and service light on after muffler change.
Replies
1
Views
134
atomsplitter
Menu
Log in
Register