Badlands Motorcycle Products!

borntoride63

Supercharged
Joined
Mar 28, 2009
Messages
223
Location
pennsylavania
anybody know where you can order? I have seen there billet license plate frame with the sequential L.E.D. lights looks good! wondering if it will fit on my standard rocket? or possibly could it be mounted above tailight on one of those slight lay down brackets? also they have billet seq. turn signals for up front for under handle bars! not sure if they would mount either! seems most custom stuff is always for the hardleys! ;)
 
If you haven't done so already, getting rid of the factory low hanging monster bracket for a shortened version that tucks up under the fender looks much better and shows more tire.

Plate frames are typically standard size and go on any bracket made for the same size plate unless you are looking for a special billet side mount/fender mount set up. Just depends on how much you want to spend, anything with HD associated will surely cost more than it's worth. lol

I got mine off ebay for $45, can't remember the name of the place, but it's a metal fabrication shop and the bracket is well made. I'll see if I can't find the guys name.
 
Last edited:
yeah already have the rivco HF! was interested in the badlands because of the integrated turnsignals! so I can ditch the stock ones! go to www.badlandsmotorcycleproducts.com and check out the video! looks well made! and cool too! sight says they sell through there dealers but does not list them!


HellFire said:
If you haven't done so already, getting rid of the factory low hanging monster bracket for a shortened version that tucks up under the fender looks much better and shows more tire.

Plate frames are typically standard size and go on any bracket made for the same size plate unless you are looking for a special billet side mount/fender mount set up. Just depends on how much you want to spend, anything with HD associated will surely cost more than it's worth. lol

I got mine off ebay for $45, can't remember the name of the place, but it's a metal fabrication shop and the bracket is well made. I'll see if I can't find the guys name.
Click to expand...
 
I eliminated the turn signals with just a regular billet frame with built in lights. It's alot cheaper than most LED models. Found it on ebay too. If you change anything on the R3 turn signals they will blink wrong, so plan on a load equalizer too.
 
Last edited:
thanks HF! yes if you can find the name plz post! emailed badlands, yes you were right the plate is costly! and yep is does require equalizer too! which puts it over 200.00 not in the budget right now! :( you have any pics of your setup?

HellFire said:
I eliminated the turn signals with just a regular billet frame with built in lights. It's alot cheaper than most LED models. Found it on ebay too. If you change anything on the R3 turn signals they will blink wrong, so plan on a load equalizer too.
Click to expand...
 
Hey don't know if this helps anyone but I bought a taillight/brake/turnsignal bar from these folks and have made my own tag/taillight bracket works pretty well and cost about $45.00, they have a huge selection of stuff , www.radiantz.com/ .
Yall stay safe out there.
 
DSCN0048.jpg Found one .... It's a relatively inexpensive billet frame with regular bulbs (not LED), mounted on an aftermarket tag/turnsignal mounting bracket. I took the front and rear turn signals off and use the tag frame and mirrors as signals.

There is a closeup view of the tag/frame posted in the member picture gallery as well.
 
Last edited:

Similar threads

Samurai Motorcycle Helmet??
Replies
5
Views
3K
1olbull
1olbull
Back
Top