Search results for query: *

  1. warp9.9

    Saga of the water pump

    I just found a extra pump laying around in the basement. Heard so much negative energy about them I have to hang it downstairs.
  2. warp9.9

    Coil pack

    Don't put the plate back in it only holds wire connectors they will lay in there just like OEM. Just run the bolts back in without it. This makes it easier to check and crimp the low tension leads on the coil.
  3. warp9.9

    Triumph Rocket 3-Lifter.. Have you one ??

    I had the oportunity to view in use and even jump in when the bike started to tip over. A floor jack and a 4x4 block and jack stands is easier and safer.
  4. warp9.9

    Front fork seals leaking. Need information

    I think some grime works its way up first getting by the dust shield and getting trapped between the seal and the dust cover so it does go away and works under the seal. Anyway good thing to have around when you do maintenance or just think about it for no reason.
  5. warp9.9

    Front fork seals leaking. Need information

    First try Seal cleaner like below and yes you can make them out of a plastic milk carton.
  6. warp9.9

    Running lean after supercharger and tune

    MAP sensor plugged in but no vaccum line. (I balanced throttle bodies the old way with vacuum gauges.) F to L switch over set to zero so it never looks for any information from the map sensor except it is powered up. I ran the tree vacuum lines to the blow off valve. You should hear blow off...
  7. warp9.9

    R3 classic running like a twin. Backfiring and stumbling

    Also check and crimp the low tension leads to the coils. They get loose and give random miss fires that are hard to chase down. If seen a few of the leads fall right off. The front coil is the hardest to get at. Easier if you already went to triple filters or some other aftermarket filters...
  8. warp9.9

    Maggie Valley, NC August 7th-9th

    https://maps.app.goo.gl/rT7ZdcEE7gtfzVR87?g_st=ac
  9. warp9.9

    June 29, 30 Maggie Valley

    What your not into upgrades 😃 Or is that considered a update 🤔
  10. warp9.9

    Throttle Cables Binding?

    Ok I'm just jumping in here Think of down on the throttle body as course adjustment and the two adjusters at the top are for fine adjustment as things stretch and chand a little. Much like the clutch has the course adjustment at the bottom where the cable mounts and fine adjustment up top at...
  11. warp9.9

    Throttle Cables Binding?

    Fine adjustment up top the rest below down by the throttle body mounting bracket where you check the cable freeplay. This is a push pull system messing with what people mistake as a idle stop screw and incorrect cable freeplay binds the stepper motor controls leading to people thinking they are...
  12. warp9.9

    2005 ignition switch removal

    I just checked a couple of my bikes they are security break-off bolts one time used and the head twist / breaks off. Thats why I reverted to my inner Machinist 🙃
  13. warp9.9

    Triumph Rocket 3 Sidecar Kit Brings Retro Art Deco Style

    5500 a older 07 tourer. Durn thing is only 5 miles from me 🤔
  14. warp9.9

    2005 ignition switch removal

    Exactly I unscrewed mine using a prick punch and changed them over to standard Allen hex style.
  15. warp9.9

    2005 ignition switch removal

  16. warp9.9

    2005 ignition switch removal

    Yes they are security torx basically a torx with a hardened pin in the middle. Some people call the pin torx.
  17. warp9.9

    Did I just mess up my cam cover?

    Actually color does not matter. Early years pre Roadster had better cam covers I have both black and chrome and neither has ever leaked. And I've reused the gasket more then once. But the old cover surrounds and holds the gasket in the correct location. So it doesn't squeeze out. Spark plug...
  18. warp9.9

    TPS and stepper motor issue

    You need the tune ecu software to set the TPS voltage. It tells the ecu to fully retract the stepper motor shaft prior to setting the voltage. Plus handles the adaptation cycle program.
  19. warp9.9

    Operation Blackie

    Wow that's a non updated engine from the looks of the detent wheel and a 04-05 series clutch. For safety if I were you I'd drop the sump pan for cleaning and inspection. It would suck to put her all back together and ride around wondering how the torsional damper bearings were holding up. Just...
  20. warp9.9

    2014 roadster parting out

    Ya just curious If my memory is still there I believe Steel broke his exhaust cam on his carpenter roadster. I didn't know of you had the cam cover off or not yet.
Back
Top