Search results for query: *

  1. RUN666

    What do you think about the riding modes? Do you find them useful?

    and balls...
  2. RUN666

    Need help with removing throttle housing on handlebar

    Yes, another rotten idea from Triumph to force its customers to go to the dealership...it's becoming really annoying!!!
  3. RUN666

    Suspension set up

    Well, too bad for them!!!
  4. RUN666

    Suspension set up

    Having horsepower is good, but being able to get them on the ground and control them is better...
  5. RUN666

    Suspension set up

    Hello, you have to be realistic... The original suspensions of the Rocket are of good quality for a guy who rides quietly without really asking questions !!! For the others, those who want to send big gas or those whose weight exceeds 100 kg, they are quickly exceeded. I have another bike...
  6. RUN666

    Heavier rear shock

    Unfortunately I still have no feedback on these suspensions mounted on a Rocket 3... They will definitely be my next shock absorbers as soon as my banker allows me to order them (!) with the Andreani fork stanchions/cartridges because there is no point in having good shock absorbers with a...
  7. RUN666

    Heavier rear shock

    You should try this brand, they are able to make you a shock absorber perfectly adapted to your morphology at the same level of quality as Öhlins: https://emc-suspensions.fr/fr/4134-2500-rocket-iii-r-2020-2022
  8. RUN666

    Current opinions on 2up use of newer Rockets

    For occasional use, it's really a great achievement! Bravo!
  9. RUN666

    Current opinions on 2up use of newer Rockets

    I'd say just one thing: my wife prefers the Street Glide CVO, and my daughter bought a motorcycle... It's definitely not a bike for two-up riding. It can help out from time to time, but not for more than a few kilometers, or your passengers are masochists...
  10. RUN666

    What do you think about the riding modes? Do you find them useful?

    I use only one "riding mode": my brain ! (always in sport mode)
  11. RUN666

    Ixil

    I fitted the Ixil on my "R" and I confirm that there is no catalyst and so much the better...The exhaust comes with two kinds of removable cups intended to reduce the sound...I tried them but did not fit them because it is really not very effective
  12. RUN666

    Succion when opening gaz tank...

    I had the same problem as you after changing my air filter to install a DNA... pinched air intake pipe and, in addition, assembly of the small valve which is installed in the pipe backwards (factory...). On the other hand, I don't see the problem with the direction in which we put the tank cap...
  13. RUN666

    Front tire removal.

    In France we have a proverb that says: "if you brake you're a coward, but if you don't brake you're an idiot..."
  14. RUN666

    DNA or OEM Air Filter?

    All my bikes have reusable air filters...objectively, it doesn't seem to make much difference compared to the original, contrary to what the sellers claim. The good thing is that it saves me from wasting money at dealerships... A little dish soap and specific oil (and even then, not on all of...
  15. RUN666

    Front tire removal.

    I absolutely disagree with you...if you leave the calipers in place it's a real pain to reassemble the wheel while aiming to slide the discs between the pads...unscrewing the calipers is much simpler and faster.
  16. RUN666

    Front tire removal.

    The brake calipers absolutely must be removed otherwise you will not be able to remove the wheel. For the axle it is a 19 mm male BTR and it must be tightened to 65 Nm. I just did it...
  17. RUN666

    Asymmetrical front tire wear

    I conclude that the steering is not centered simply by noticing the asymmetrical wear of the tire... Add the engine's overturning torque to this difference and the explanation for this wear seems obvious to me. Afterwards it is very possible that the wheels are aligned in the longitudinal plane...
  18. RUN666

    Asymmetrical front tire wear

    The offset I measured is between the bottom of the fork and the disc collar. Take a good look at your bike and you'll see, without measuring, that the left side is larger than the right side. You can also see this offset by looking at the front mudguard.
  19. RUN666

    Asymmetrical front tire wear

    Yes, on most motorcycles except that here the spacers are the same length so you can't get them wrong...
  20. RUN666

    Asymmetrical front tire wear

    Well, after removing the front wheel, here are the results: - The guy who tightened the front wheel axle didn't apply the correct torque (65 Nm). It took me 10 minutes to loosen it... - The two spacers are identical (25 mm each) - The original wheel is probably the cause because, on the ABS...
Back
Top