Search results for query: *

  1. TURBO200R4

    MAP and or Air Pressure sensor fault

    Just my opinion my opinion is you are suppose to have every thing set up with the stepper motor 1st then the tps and when it is running decent you balance the throttle bodys and then you raise your idle to around (in your case) 640 on #1 then set #2 and #3 to number #1 you can not cure all...
  2. TURBO200R4

    New to this beast of a bike.

    Welcome from Tucson Arizona USA
  3. TURBO200R4

    Strange front end wobble

    on my 07 if i take my hands off the bars on decel at around 50 to 40 i get a wobble to tank slapper on different tire types. and it seems worse if i am loaded up in the back i can feel the front acting up when pulling in gas stations or trying to do tight maneuvers.
  4. TURBO200R4

    Tuneecu not connecting to OBD Link LX101 2.1

    everyone probably knows this but i always have to have the rocket ignition ready to start b4 i could connect.
  5. TURBO200R4

    Now owing Rocket 3, how do you tolerate other bikes? What would your next bike be?

    cattle stops/cattle guards in a right hand turn wet my el Camino turned side ways in a straight on wet my sportster gained about 2000 rpm was like i hit a patch of ice
  6. TURBO200R4

    Starting issues

    so when you rock the bike and and the bike starts the problem is the wire that comes through the ignition has a problem (does not carry enough volts/amps) and when you rock the bike you align the starter and flywheel teeth and it will start. @Rocket Scientist has an extra relay that he uses to...
  7. TURBO200R4

    Newbie

    welcome from Tucson Arizona USA
  8. TURBO200R4

    Now owing Rocket 3, how do you tolerate other bikes? What would your next bike be?

    Out here we have what is called open range meaning cattle is going to be in the road so they use cattle guards (about 5 steel beams across the road in the road) not to bad in a straight line just a bump when you go over it. but when it is in a bend it becomes a real pucker moment you have to try...
  9. TURBO200R4

    Loose Mirror

    wave washer T3550203 TOLERANCE RING T2550550 HTH
  10. TURBO200R4

    Mass air sensor

    well you are a little confused or you just don't have the proper words to explain. the map (mas air pressure) sensor has three vacuum hoses going from the throttle bodys into a four way hose connector then a bigger hose that plugs into the sensor it also has a thrree wire connector that hooks up...
  11. TURBO200R4

    Our Rocket legends

    It is amazing how my brain auto corrects so i never know that it is wrong. most of the time for the good. sometimes i have to start reading all over.
  12. TURBO200R4

    Gearbox repair?

    I would say that you are probably going to be having the same problem there is about 4 codes for the map sensor and each code means a different problem there is also soft codes problems that appear after you drive a while hard codes are codes that come back as soon as you clear them. in my...
  13. TURBO200R4

    MAP and or Air Pressure sensor fault

    color codes map sensor pin# 1 pink wire to a01 5 volts pin# 2 pink/black to a07 ground pin# 3 pink /slate or gray it does not use 12 volts
  14. TURBO200R4

    MAP and or Air Pressure sensor fault

    first thing we need to know is the year, model, make to get started if it is backfiring through the throttle bodies then on each backfire you need to check the hoses because it will blow them off. give code numbers.
  15. TURBO200R4

    Hi all. Thanks for the forum and the fount of knowledge..... I will be dipping deep.

    welcome from Tucson Arizona USA
  16. TURBO200R4

    Greetings from the Czech Republic

    welcome from Tucson Arizona USA
  17. TURBO200R4

    Greetings from Germany!

    Welcome from Tucson Arizona USA
  18. TURBO200R4

    Baldwin, Michigan

    The Rocket's need a lot of blessings lol
  19. TURBO200R4

    Semi retired the 2020 GT!

    What was the rpm? At 190
  20. TURBO200R4

    3rd gear slipping on high torque

    I have never seen this information In print but since I am telling you you can carve it into stone lol I think that you adjust the bottom to where you have enough adjustments on the top that you can make a quick adjustment either way with your fingers. Although I have never been able to turn...
Back
Top