If I take the tank off the bike can a longer fuel hose and longer electric wires be installed so the next time removing the tank will be easier ? Has anybody done this ?
Just FYI folks. RedR3 and I have been sending PM to each other. These pipes are still available from RedR3. Give him a call. His pipes are practically new.
Before I installed the NLR 200 HP kit, I was running the Dobeck Performance AFR Plus piggy back fueling system. For comparison it was like a DynoJet PCV but different. The gauge is the controller and AFR read out. At the time of the picture, Mr. Dobeck had sent me a 2nd unit to try out a...
Here is mine. Corbin bags and fairing. Corbin did not make the fairing with a cubby for a radio or speakers. The seat can be done with Corbin too or take a visit to a customizer such as Legendary BMS seats and Russel Day Long. I had mine done years ago by a simular seat builder like the...
Here are some pictures of the Mad Hornets floor boards I installed on my 2023 R3 GT. I also moved them back and extra inch by making a simple extension bracket. To make this work I had to posision the the shifter lever very high in order to have clearence under the floor board for the shifter...
I have an improved tune 20226 slightly modified for better idle rpm, AFR fueling, temp fan on, speedometer correction, 2nd throttle bodies open to 100%. I also have a set of TORs should you be interested.
I have installed these on my 2023 GT. The tiny pins that come with them are not heafty enought to keep the joints from rocking after a few rides. I decided to buy several 1/8 wide by 1/2 long roll pins. Drilled the pin position for the angle I liked. Then after that had the joint between the...
I set my suspension to the settings Col and Zig suggested. They sucked out load for me. I'm 185 pounds. Since then I dialed it in better for my weight. I would like to know your weight and settings you used. Please advise.