Search results for query: *

  1. r3badboy

    Feeling achieved

    Depending how your cutting your bear claw, you might want to stick your ait sensor as in photo 🤔
  2. r3badboy

    Water pump hoses

    You can buy a setup that plugs into your obd2 plug that will read temp & also does speedo & volts
  3. r3badboy

    Rocket 3 Roadster 1st Gen 2004-2009 & 2nd Gen PARTS 2010-2019 !?!

    Me too, but that's why I have 5 of them ...just in case 😅🚀
  4. r3badboy

    TuneECU wanted de-cat mod pipes 3 k&n

    You can always copy & paste a tune that's not compatible but has same setup your bike is running. I have done this on a couple of mine. Copy map values from a map you like, open your original map & paste. Save map. Check devices & untick or tick what you want. Save again & then download to ecu.
  5. r3badboy

    K&N filter fitment

    Aliexpress bottle, welded 2x mounts that fit onto original radiator cowling mounts.
  6. r3badboy

    Inherited a 2018 Roadster

    Yes, got the 9 inch grinder out 😅 Oooops that was another for ramair, I used a dremel for the red one 👍
  7. r3badboy

    Inherited a 2018 Roadster

    Or more subtle...🚀
  8. r3badboy

    R3 classic running like a twin. Backfiring and stumbling

    Have you checked fuel pump pressure? Might need a new fuel filter...
  9. r3badboy

    R3 classic running like a twin. Backfiring and stumbling

    Sounds like a crook injector. If its that it won't show up a fault code. Best way is to buy a cheap injector cleaner kit & test all three. If it doesn't open & spray that will be your problem. Had it happen to me & just bought a second hand one from the wreckers. Cold to the touch on one of the...
  10. r3badboy

    R3 classic running like a twin. Backfiring and stumbling

  11. r3badboy

    Map suggestion - R3 2005

    If you find a map that's not compatible with your ecu, (eg roadster map) but has same setup, you can copy & then paste the values into your existing map. You would need to then re download it to ecu.
  12. r3badboy

    Running lean after supercharger and tune

    With the O2 sensor unchecked you don't have to unplug it. When you uncheck O2 you need save tune & re flash ecu.
  13. r3badboy

    Got my first speeding ticket... ouch!

    Just got one the other day 😂 The one before that I was doing 179kmph in a 100 zone...off to court one. The thing is a mate was riding his bike & we both got tickets & went to court. Long story short they had to prove who was doing that exact speed...they couldn't so it got thrown out 😅 I know it...
  14. r3badboy

    overheating in traffic

    I see with these 2.5 bikes its a bit more complicated...why do they do this to us old folks 🤷‍♂️😅 Hell I just unticked 2nd tps & chucked the stepper motor in the air box on 2 of my roadsters...keeping it simple 😂🚀
  15. r3badboy

    overheating in traffic

    Yes technically the voltage shouldn't change for the fan that would make it run slower? Perhaps you need to change the temperature for when the fan kicks in...fan running in earlier should keep the bike cooler when in traffic 🤔
  16. r3badboy

    Rocket 3 clutch issues

    Correct 👍🚀
  17. r3badboy

    Rocket 3 clutch issues

    The judder spring has to be the right way around too 🚀
  18. r3badboy

    Rocket 3 clutch issues

    Judder spring stays in with barnett 🚀
  19. r3badboy

    Won't start!

    😳 got another battery you can try 🤔
  20. r3badboy

    Won't start!

    Hate that click click...I have done this fix to 2 of my Rockets & zero problems since. I tried the other way with the extra relay & it wouldn't work but this way did 🤷‍♂️ One an 06 & other 10 roadster.
Back
Top