Video on greasing the drive shaft splines.

mo8414 · Feb 22, 2026

Here it is, its not perfect since I did all the editing on my phone but it will do.

mo8414 · Feb 22, 2026

Also removing the nut from the stud. I think a induction gun would work great for this, you could do it while its on the bike and probably not have the stud come out.

biker1059 · Feb 22, 2026

Thank you!

rick danger · Feb 23, 2026

mo8414 said:
Also removing the nut from the stud. I think a induction gun would work great for this, you could do it while its on the bike and probably not have the stud come out.

I actually ordered some fine thread nuts for that project, To do the double nut thing,but I got lucky and just the acorns came off.

eka · Feb 23, 2026

I wonder does it really need to take off pegs and starter motor cover. Could it be done without that extra job?

Edit: Ah, there is that one bolt through cover and plastic.

mo8414 · Feb 23, 2026

eka said:
I wonder does it really need to take off pegs and starter motor cover. Could it be done without that extra job?

Edit: Ah, there is that one bolt through cover and plastic.

Only takes a minute to get the starter cover off anyway so not to much hassle.

rick danger · Feb 24, 2026

mo8414 said:
Here it is, its not perfect since I did all the editing on my phone but it will do.

Thanks for that. I did the rear splines, but never even thought about the front. Dumb. I'll get them next tire change. Having access to the front u joint makes it easier to get the rear in. I used some string to lift it.

Video on greasing the drive shaft splines.

mo8414

Supercharged

mo8414

Supercharged

biker1059

Turbocharged

rick danger

Turbocharged

eka

.020 Over

mo8414

Supercharged

rick danger

Turbocharged

Similar threads

Forums

Features

Forum Usage