Recent content by raytracer

  1. raytracer

    Any issues with 2007 Rocket

    No issues on mine - other than the niggling little things you can find fixes for all over this board.
  2. raytracer

    Jumping out of 1st :-(

    same for 2nd gear too.
  3. raytracer

    K&N Filters ok in the rain?

    A remap is strongly suggested. The stock tune is too lean Wow - I actually answered a question for once instead of asking. :)
  4. raytracer

    K&N Filters ok in the rain?

    I just did this mod. not hard at all and i was able to easily fit the filters under the bearclaw - just turn them all to the 2 o'clock position.
  5. raytracer

    brake on/off - not much change in taillight brightness

    I tried to ground the barrel of the bulb to the frame of the bike, no difference. I think it definitely has to do with the rear pedal. I must've threw it out of whack trying to adjust the pedal height and now the switch that picks up that signal thinks the brake is depressed all the time.
  6. raytracer

    brake on/off - not much change in taillight brightness

    funny, the tailblazer comes with the following warning in the installation manual: Caution! Harley & Triumph Sockets of some of these models have been known to be wired wrong. Test to make sure that the barrel of the socket is grounded, and the contacts are wired as shown here. Then...
  7. raytracer

    brake on/off - not much change in taillight brightness

    Ok, so this issue still persist. I just received a new tailblazer and it totally freaks out. It stays on all the time when the bike is on. The front brake has no affect on it. The rear brake however I can use to make the light flicker. I think through my adjustment of rear brake pedal, I've...
  8. raytracer

    A little nervous now

    Yeah, you're telling me. It was scary too because the noise and the smell made it seem like the engine was about to blow up. It wasn't an obvious rattling sound and seemed to be coming from inside the engine. I was freaked.
  9. raytracer

    A little nervous now

    Red loctite. It probably won't help, I just put it on there because. Hopefully it backed out due to the presence of the rubber washer and will be good now that it's gone.
  10. raytracer

    A little nervous now

    Man, am I relieved (and an idiot). I wouldn't have been able to sleep good tonight thinking I f'd something up on my bike. Back when I removed the 02 sensor, I plugged the hole with an M18 oil drain plug. This had started backing out and is what was making the rattling sound. The burning...
  11. raytracer

    A little nervous now

    I installed the triple K&N's and installed the dynojet 02 eliminator a week ago. Loaded the appropriate tune and everything seemed fine. Until today. All of a sudden, sitting at a light, I smell what I think is an electrical smell. At first I thought maybe it was my rear brakes burning because...
  12. raytracer

    Fitted K&N's and Front Fender.

    Any part number by chance? I couldnt find them on ebay or kuryakyns site.
  13. raytracer

    Fitted K&N's and Front Fender.

    Where did you get the chrome caps for the filters?
  14. raytracer

    brake on/off - not much change in taillight brightness

    reseating the bulb seemed to solve the issue. The bulb only goes in one way. I never had any of the built in wiring loose or anything, only unplugged and re-ran the harness and cable when I put in my rivco plate relocator. anyway - thanks for the replies, seems to be working now.
  15. raytracer

    brake on/off - not much change in taillight brightness

    I pulled the bulb again and reseated it - seems to be better now for some reason. I"m not sure what you guys mean by grounding wire. The wire for the ground goes through the sheath to the harness, just like the pos/neg wire. No visible damage that I can see along the wire. I'll check it...
See more
Back
Top