Recent content by Mike Enfinger

  1. Mike Enfinger

    Change Roadster 2010 to HD Road King Classic EFI 1999

    I don't know about the trade etc....but that's a nice looking bike to me!
  2. Mike Enfinger

    A thought on engine oil type . . .

    What's wrong with the recommended Castrol oil?
  3. Mike Enfinger

    Anyone after a new one?

    They're trying to dump their inventory because it's getting cold and no-one buys bikes in the winter. 2018 R3Rs are $14,000 at the dealer in Nashville, TN.
  4. Mike Enfinger

    Lights Out No Start

    Follow Up. The dealer called and said that the battery was not holding a charge. When the battery got low it caused a fuse in the wiring to the starter relay to blow which caused the headlights to go out and the no start issue. The fuse was not in the fuse box. Battery problems are not covered...
  5. Mike Enfinger

    Lights Out No Start

    Thanks for the help. I've decided to take it to the dealer since it's under warranty. I'll let y'all know what they say. It'll be a week before they can get to it.
  6. Mike Enfinger

    Lights Out No Start

    I rode my 2015 R3T to work last week. When I arrived home on Friday I noticed my fog lights and head light were out(bike was still running). Just the small bulb at the bottom of the head light was on. After I turned the bike off with the key it would not crank. I only have a click when I push...
  7. Mike Enfinger

    I am confused about tire size.

    Yep.
  8. Mike Enfinger

    I am confused about tire size.

    180/70 R16
  9. Mike Enfinger

    Rocket III Touring discontinued?

    2018 Triumph Rocket III Touring Cranberry Red / Phantom Black | Indian® Motorcycle Knoxville This dealer thinks they are gonna have 2018 Touring models.
  10. Mike Enfinger

    Riser bolt question?

    Thanks, I was actually thinking I could drill it out then use some kind of sleeve if I ever wanted to go back to original. Now I now where to get the parts!
  11. Mike Enfinger

    I have an opportunity - could buy 1971 Triumph Bonneville T120

    1964 Triumph Bonneville - Unrestored Just for comparison.
  12. Mike Enfinger

    Riser bolt question?

    What about drilling the bushing out to 1/2 and running a 1/2x13 bolt from the bottom?
  13. Mike Enfinger

    Riser bolt question?

    The end that goes into the riser is 1/2x13x3/4. The end that goes thru the bushing is 10mm and has a 1.25 pitch. It need to be 2 1/2 inches long on the 10mm end.
  14. Mike Enfinger

    Riser bolt question?

    I have a 2015 R3T and bought a set of Krator risers. They did not come with bolts so I checked around and found these bolts for a Kawasaki Vulcan were the closest to what I needed. They were too short and did not extend out enough to bolt on. So, does anyone know where I can get a set of bolts...
  15. Mike Enfinger

    LED Auxiliary Brake Light

    Well I tried the red wire first and the running light came on. Switched over to the blue wire and the brake light worked.
See more
Back
Top