Recent content by Hillbilly

  1. Hillbilly

    'OzClaw' is now available

  2. Hillbilly

    Greetings from Rockwall Texas

    Hi SteveO welcome from the garden state Victoria Australia
  3. Hillbilly

    Installing RamAir filter ... Should I cut the BearClaw for better airflow ?

    Hi Living Legend,I not long ago installed the ramair system on my 06 roadster it’s only got the cat with no guts and sports mufflers, to keep the original look of the bike I personally wouldn’t cut the bear claw even though the filter had to be squashed a tad.I only did the 12 minute tune and...
  4. Hillbilly

    Slipping clutch

    Thanks for your help on that one sonny
  5. Hillbilly

    Slipping clutch

    Seems like a toss up between OEM or Barnett for springs and MTC basket and fibres thanks again
  6. Hillbilly

    Slipping clutch

    Thanks sleeves I’ll have a look at the adjustment as when I got new tyres on it they said they adjusted the slack in the cable I’ll back it off a bit and see what happens
  7. Hillbilly

    Slipping clutch

    Cheers
  8. Hillbilly

    Slipping clutch

    Which is?
  9. Hillbilly

    Slipping clutch

    Thanks there steel it has the occasional decal popping but not all the time
  10. Hillbilly

    Slipping clutch

    Hi gents after sorting out my electrical issues and putting a Ramair filter system on my bike I’m noticing the clutch slipping occasionally. I see EBC and Barnett seems to be positives and negatives for both, regarding spring compression,plate thickness,just after some thoughts to help me make a...
  11. Hillbilly

    A big hello from Yorkshire in the uk

    Welcome Mick from down under great site with heaps of knowledge
  12. Hillbilly

    Spy shots new rocket

    Looks TOUGH, taking the style out of it though and turning into a street fighter doesn’t tickle my fancy
  13. Hillbilly

    2007 R3 roadster Gippsland Victoria

    2007 R3 roadster Gippsland Victoria
  14. Hillbilly

    Dead bike

    Thanks heaps everyone for your input seems the clutch switch was the culprit, couldn’t work out how to pull the thing apart without destroying it so I removed the lever sprayed half a can of contact cleaner in and wriggled it about a bit and f—k me dead I’m as happy as a fox in a chook house...
Back
Top