Recent content by Codawg

  1. Codawg

    DIY Side Mount Plate From Two Cheap Kits

    Yeah it's on the top where i drilled the three holes to mount it. It may not get the whole plate due to the curve, but I'll wait and see how the police react before I change anything...
  2. Codawg

    DIY Side Mount Plate From Two Cheap Kits

    Finished plate mount design.
  3. Codawg

    DIY Side Mount Plate From Two Cheap Kits

    Thanks for all the feedback! In my opinion, between turn signals not being required on motorcycles and integrated tailight turn signals being legal the distance thing seems mute to me. I did wrestle with making the holes, but I pulled the trigger because no matter what, I will never put them...
  4. Codawg

    Scorpion tail delete is done - transferred the plate to the side of the rear wheel and moved the rear turn signals

    Nice work. I just finished mine. Check out my post!
  5. Codawg

    DIY Side Mount Plate From Two Cheap Kits

    Hello Rocketeers! I just completed my side mount plate and turn signal relocation project and I wanted to share the results. I bought two inexpensive plate kits, a pair of bolts, and some black spray paint for touch-up after cutting. I pulled the small wiring harness and split the turn signal...
  6. Codawg

    Well, I lost the gas cap...

    So much detail! I can even see it has a double lip split oring seal. You're awesome for this Einar, thanks!
  7. Codawg

    Well, I lost the gas cap...

    If anyone could shoot a picture of the bottom of their cap that would be most helpful. I'm really just looking for what the original sealing surface and o-ring gasket look like. Thanks!
  8. Codawg

    Well, I lost the gas cap...

    I know there's a cap hiding on their shelves that would work. My only concern was digging for one without the giant raised finger bar across the middle, for lid clearance concerns. Also i grabbed the cap off my truck and it grabbed the threads, but it was too large in diameter and caught the...
  9. Codawg

    Well, I lost the gas cap...

    I think so too. Some of the caps I found said they worked on 1983 and up Harley sportsters as well as the triumphs. That would definitely open up some options. I am really intrigued to make a kit to make the monza lid a real sealed cap to remove and replace the factory one.
  10. Codawg

    Well, I lost the gas cap...

    Rode for 20 minutes with no issues and no codes. Some details: 1/3 tank of gas down to 1/4 at end and gas light came on as normal, 100 degrees out, bike warmed to full operating temp during ride.
  11. Codawg

    Well, I lost the gas cap...

    About to ride so I'll let you know if any lights show up. I can tell you riding without one does not! Lol
  12. Codawg

    Well, I lost the gas cap...

    $15 Amazon pop-up gas cap for the win! This isn't over, but this will get me by for as long as I want to use it. Kucehiup Motorcycle Clockwise... Amazon.com
  13. Codawg

    Well, I lost the gas cap...

    That's just used for a springy material to hold the Cometic gasket disc I cut out down over the hole. It was a one day solution and it worked great.
  14. Codawg

    Well, I lost the gas cap...

    1. Rekey what? They don't even have a part number for the cap alone so there's nothing to buy to rekey. 2. I'm on an R3, my 2nd one in fact so im no noob, but if I would have gone down on the one day I chose to ride this way vs the other 3 when I didnt know the cap was gone and had nothing...
  15. Codawg

    Well, I lost the gas cap...

    On another note, i couldnt wait for my Amazon cap to come in tomorrow so I decided to southern engineer this...
See more
Back
Top