Recent content by Chuckster

  1. Chuckster

    Engine Vibration continues

    Hi guys, I also have a vibration which is almost eliminated when slightly depressing the clutch lever. What I see in the manual is a bushing which the clutch basket runs on, I am speculating that this could be a problem area if worn sufficiently. The other cause could be as suggest, loose...
  2. Chuckster

    Reroute standard exhaust

    Since my last post I have fitted a 1 3/4" Supertrapp universal and to fit it to the stock header I made up a "S" bend from two 90 degree 1 7/8" mandrel bends, this brings the header outlet to the correct position to fit up the Supertrapp. You will also need to weld in a small piece of 1 3/4" to...
  3. Chuckster

    License Plate and Rear Turn Signal Mod

    In these pics you can see how I attached the angle to the rack and the bracket for the indicators, at least an idea and of course my new supertrapp muffler. :cool:
  4. Chuckster

    License Plate and Rear Turn Signal Mod

    Tomcat's right I fixed a length of aluminium angle to the rack to mount the plate to and used a led No. plate light on the rear edge of the rack tapping into the original wires. I then removed the original No. plate bracket and manufactured an aluminium bracket to enable the use of the original...
  5. Chuckster

    License Plate and Rear Turn Signal Mod

    Hi all, I just carried out a license plate mod and thought I'd share it with everyone. If anyone is interested let me know, it didn't cost anything, other than the LED number plate light, just used what I had around the house. Cheers Chuckster
  6. Chuckster

    Wheels out of alignment?

    After coming back from a ride over the weekend I noticed after going through the garage and picking up dust from the floor that the contact patch on the front tire was of to the left by about 1/2 an inch, is that what you're talking about? that's what got my interest in this thread. The bikes...
  7. Chuckster

    Reroute standard exhaust

    Thanks Sratchy, the only cat in mine is in the muffler, in fact not much else but the cat. Cheers Chuckster
  8. Chuckster

    Reroute standard exhaust

    Hi all and thanks for all the input, I decided to have just the right muffler modded at Redline exhausts in Adelaide and made a branch(excuse the cocky ****, new inverter well that's my excuse anyway) from the header outlet to it and jettisoned the left muffler and crossover pipe. I downloaded a...
  9. Chuckster

    Reroute standard exhaust

    Hi Mitch, I was talking to the chap that owns Redline exhausts in Adelaide a short while ago and he said he's modified the standard mufflers to give a better note, so I would expect he could do a bit more to allow a better flow and I have the Tune ECU program to upgrade the tune. Thanks Chuckster
  10. Chuckster

    Reroute standard exhaust

    Thanks Tomcat, I was checking out Neville's web site earlier today, I'll do that thanks mate;)
  11. 2010 Roadster

    2010 Roadster

    The Missus
    • Chuckster
    • Media item
    • Comments: 0
    • Category: Member Galleries
  12. 2010 Roadster

    2010 Roadster

    The Missus
    • Chuckster
    • Media item
    • Comments: 0
    • Category: Member Galleries
  13. 2010 Roadster

    2010 Roadster

    The Missus
    • Chuckster
    • Media item
    • Comments: 0
    • Category: Member Galleries
  14. Chuckster

    Reroute standard exhaust

    Hi guy's, This is my first post having just taken possession of a 2010 Roadster and loving it, my question is this, if I were to bypass the collector and reroute the header pipe directly to the right hand muffler so as to keep the appearance of stock, would I achieve any benefits such as more...
  15. Chuckster

    Brake hose problem when fitting Rivco risers

    Thanks guy's, I found all I had to do was to reposition the brake line on the other side of the triple clamp and all is good. Cheers Chuck :whistle:
See more
Back
Top