Want to Buy WANTED SUPPORT FOR SISSY BAR

TURBO200R4

stand up straight and grab the world by the a$$
Joined
Jan 24, 2013
Messages
9,220
Location
TUCSON AZ
Ride
07 rocket III classic
wanted right hand support (A9750266) for sissybar/luggage rack.
or whole assembly
triumph pressing support right hand low sissy bar.
or tall sissy bar assembly
 
Last edited:
Tucson..... we have a 'code' problem!🤔:whitstling:
Something worries me about that part number A9550266 after doing a Google search! ;) :oops:🤣🤣🤣🤣

1620872656690.png
 
Being REAL BRAVE we shall try again!;):whitstling::cool:
A9750266
PHHEW!;):roll::roll::roll:
WAS US$52.00 from USA Dealers.:(
5 Pressing Support RH A9750266 Not available.


5Pressing Support RH
A9750266

Share this part
NOT IN STOCKAdd to Basketto Order(see FAQ)$48.81excl. VAT(£34.58)

1620873164914.png
 
G'day mate,

I can do you even better with a used pair of custom made Polished 316 Stainless Steel Quick release ones from @Mittzy . I don't have another set of Mittzy's Bobbins and extended length M8 and M10 bolts (the bobbin and bolt length details may be in one of Mittzy's old threads below). But I have some other Bobbins that should fit though. Nope wrong bobbins but they will still work fine with washers and a steel bush tube from a rubber suspension eye bush.
The original version was available in raw steel as well or Polished like chrome.
I bought a new set off @Mittzy myself with his SS pannier EZ Brackets and have since found a pair of the QR SS Sissy Bar brackets on a used rack I acquired. And I have now found a used pair of stock Pressing Supports and a rack for the sissy bar and pad, so I now have a complete Sissy bar/Pad/rack and side Pressing Supports RHS A9750266 and LHS A9750265 that I have promised @QwiQR3 if he still wants it.



1620873947195.png

1620875185419.png

1620875669260.png
 
Last edited:
G'day mate,

I can do you even better with a used pair of custom made Polished 316 Stainless Steel Quick release ones from @Mittzy . I don't have another set of Mittzy's Bobbins and extended length M8 and M10 bolts (the bobbin and bolt length details may be in one of Mittzy's old threads below). But I have some other Bobbins that should fit though. Nope wrong bobbins but they will still work fine with washers and a steel bush tube from a rubber suspension eye bush.
The original version was available in raw steel as well or Polished like chrome.
I bought a new set off @Mittzy myself with his SS pannier EZ Brackets and have since found a pair of the QR SS Sissy Bar brackets on a used rack I acquired. And I have now found a used pair of stock Pressing Supports and a rack for the sissy bar and pad, so I now have a complete Sissy bar/Pad/rack and side Pressing Supports RHS A9750266 and LHS A9750265 that I have promised @QwiQR3 if he still wants it.



1620873947195.png

1620875185419.png

1620875669260.png
He does still want it...
 
Back
Top