Search results for query: *

  1. biker1059

    my key wont open my gas cap

    Try Flea Bay. Here's one of many http://www.ebay.com/itm/TRIUMPH-FUEL-GAS-CAP-Rocket-III-3-Street-Triple-R-TT600-/270919127713?pt=Motorcycles_Parts_Accessories&hash=item3f1409d2a1&vxp=mtr
  2. biker1059

    Bluetooth-helmet communications

    I use the Sena SMH-10, daily with no problems. Pairs with phone easy and plays music in stereo. And now you can update it through your computer.
  3. biker1059

    herky jerky Rocket III

    ECU needs new tune and remove secondaries
  4. biker1059

    Detent Spring

    Easy fix, takes about 6 hours. Just need an impact, thats about the only thing other than hand tools. Make sure you recover all of the spring. If you can't find it, its probably in the oil pan, then its a little longer job.
  5. biker1059

    8 " taller windscreen on a Standard

    If you don't mind Rocket Scientist, please post a picture of your modified lowers.
  6. biker1059

    Warped Front Rotors?

    Get em from Flip $187 a piece, you can do it yourself. Here's the link EBC Brake Rotors | Flipmeisters Specialty Products
  7. biker1059

    clutch pop

    Did not replace the lifter, it looked brand new. I don't think Triumph replaced it the first time it happened. The spring also looked good and was still strong. Its really an easy job. I'm not really mechanically inclined. Just put everything back the way it came off starting with the radiator...
  8. biker1059

    clutch pop

    Yes, one of the weak links in the Rocket motor. I'm on my third one. The good thing, I can now change one out with my eyes closed. Not really, I peek. How many miles on your bike? Just curious. I keep all the spare parts to do a clutch shaft and detent spring job, gaskets and parts.
  9. biker1059

    How to by pass ignition switch? Please tell me how to bypass.

    Here's instructions for a remote ignition, I have it on my bike and love it.
  10. biker1059

    Standard horn upgrade

    I have mine mounted behind the left side cover
  11. biker1059

    Fork Oil Which one

    Is there any other special tools needed to change the fork springs? Been wanting to do this for a while.
  12. biker1059

    Changed coolant

    If your talking about the bleed bolt on the side of the engine, yes, you need to take it all the way off to bleed properly. I just replaced my detent spring and when filling with coolant it would not bleed off the air until it was all the way out. Just wash it off with water if it gets on the...
  13. biker1059

    Help With Dyna Beads!

    If you go through the valve stem you have to take the core out and deflate the tire. Pour them in very slowly. The 90 degree valve stem makes it almost impossible to put them in.
  14. biker1059

    Help With Dyna Beads!

    If the tire is off the bike take it to a tire shop and have them break the bead on one side of the tire and just pour them in. Then just air the tire back up. It takes me about 40 minutes to put them in through the valve stem.
  15. biker1059

    I've looked but I can't find - popping under the saddle!

    sync your throttle bodies, or have your dealer do it, better yet, get Tune ECU and do it yourself.
  16. biker1059

    Injector cleaner

    Thanks for the responses. So here's what I did, went to Advance auto and bought 2 cans of Sea Foam which by the way is on sell for $7.99 a can. Dumped about half the can, 8oz, in a full tank and went riding. About 30 miles in I noticed the engine was running alot smoother and before long she was...
  17. biker1059

    Injector cleaner

    What are you guys using to clean your injectors? Just plain injector cleaner?
  18. biker1059

    Gas Cap Key Flap

    You can take the gas cap off and buy a screw on off ebay. KTM TRIUMPH APRILIA FUEL GAS CAP 675 955I 990 Mille RSV | eBay This is just one example of many
  19. biker1059

    Popping at idle

    Just reloaded my tune, actually blastedbones tune and reset adaptives, idles silky smooth, hope it sticks this time.
  20. biker1059

    Popping at idle

    I'll give you all credit. Just checked the wire connections and the vacuum hoses coming from the throttle bodies, everything ok. Still looking.
Back
Top