Search results for query: *

  1. Ridefree

    Seeking a replacement fuel pump resource

    That’s how I had mine set up but when I inserted it in the tank the strainer hit the roof of the tank and bent backwards over the pump and kinked the strainer. As I pushed it further back in the tank where The floor and the roof of the tank came together I felt resistance and that I would have...
  2. Ridefree

    Seeking a replacement fuel pump resource

    What fuel strainer are you guys using with the wallbro 342? The one they sold me sticks way out of the rubber boot and kinks when it fold over and it still not all the way into the tank. Can’t use the stock went off the old pump as it was broken and getting it all apart. Thanks in advance, Ridefree
  3. Ridefree

    Fly lead fuel pump wire

    Hi all, I was replacing my fuel pump and discovered I had a broken pin on the end of the fly lead that plugs into the plate. The other end that plugs into the pump looks fine. So I am looking for a new Fly lead. I thought of trying to find new pins and soldering one onto the end what’s the...
  4. Ridefree

    Seeking a replacement fuel pump resource

    I have heard there is a cheap knock off of that pump. They actually have one in stock at a speed center here in town so I’m going to go get it. If it doesn’t say made in USA then I know it’s counterfeit. Do you think that would be safe to say or is there another way to tell
  5. Ridefree

    Seeking a replacement fuel pump resource

    I have found the Walbro 342 on Amazon. Picture looks like the fuel strainer is not included with the pump. Is this what you guys have found or am I looking at an incomplete picture
  6. Ridefree

    Seeking a replacement fuel pump resource

    Thankyou for that info
  7. Ridefree

    Seeking a replacement fuel pump resource

    I am needing to replace my fuel pump and found this thread. I have found a wallbro gss 342 in different flow ratings. Am I looking for a Walbro 342 or a wallbro GSS 342? Is there a difference? And what flow rating would you guys recommend. It looks like it comes in several different Flow ratings...
  8. Ridefree

    Air intake mod

    I believe the ram air set up comes with a wiring harness extension for the AIT sensor and the sensor actually plugs into a hole in the short duct between the filter and the throttle bodies. And whole thing fits under the bear claw. It eliminates all of the ducting under the tank and the factory...
  9. Ridefree

    Air intake mod

    That’s interesting I’ll consider that
  10. Ridefree

    Air intake mod

    A few years back I believe The word on the street was that the Ramair was the best intake system over the three filters because it had a place for the air intake temperature sensor to go. My question is has anything better been found I am ready to put one on my bike and just curious of what the...
  11. Ridefree

    Glad to be back, Ridefree rides again.

    No no, please don’t misunderstand, the whiskey idea was right up my alley
  12. Ridefree

    Sump plate gasket

    Thanks for all your replies guys
  13. Ridefree

    Sump plate gasket

    Yes. I’m thinking the gasket should get the job done if it was designed properly. I have seen gasket dressing, especially silicone, actually caused the gasket To leak by causing a slippery surface and splitting the gasket as it was torqued it down.
  14. Ridefree

    Sump plate gasket

    That’s what I was thinking. Have you had any leakage problems?
  15. Ridefree

    Glad to be back, Ridefree rides again.

    No that’s what I’m talking about
  16. Ridefree

    Glad to be back, Ridefree rides again.

    Hello everyone, It’s been quite some time since I’ve been here. Had career issues family issues and other things that kept me away from the motorcycle lifestyle for sometime. But I’m back now and jumping back in. Glad to see some of the old names I remember still around. Glad to be back, Ridefree
  17. Ridefree

    Sump plate gasket

    Thank you sir, glad to be back
  18. Ridefree

    Sump plate gasket

    Hi All, I have been away from the motorcycle lifestyle for sometime now due to health and career situations and other situation. I am now getting back to Riding and getting my 2013 R3T back in shape for the road as it has been sitting in the corner neglected for sometime. I need to replace the...
  19. Ridefree

    Adjusting throttle bodies on Touring.

    I use tune ecu to check the balance and to adjust if needed. It gives me a guage for each cylinder Ridefree
  20. Ridefree

    Just got my first r3t

    Another welcome from sunny Florida Ridefree
Back
Top