Search results for query: *

  1. my key wont open my gas cap

    ok Fellas, I got it open , soaking it with a light oil and working it back and forth with key in lock holding pressure down on key and grabbing key with pliers working back and forth careful not to twist key, now im looking for a non locking gas cap that will fit the r3 classic

  2. my key wont open my gas cap

    I know the right person will see this post and have an answere, or different ideas, my next option is to destroy the whole cap and install different one ,

  3. my key wont open my gas cap

    Yes I have

  4. my key wont open my gas cap

    I will put a non locking gas cap if I ever get this S.O.B off

  5. my key wont open my gas cap

    I have taken all screws out, I have a little wiggle room , still cant get it open , im at a loss of what to do

  6. my key wont open my gas cap

    bought it new in 2008. its been working fine , but it has been sitting up all summer, im guessing its the humidity got kinda rusted up , but if it wont open I don't know what to do other then drill it out, been working key in and out and letting it soak with some oil,i might have to take off...

  7. my key wont open my gas cap

    how the hell am I gonna fill tank up ? I cant get my gas cap off using the key , has anyone else had this problem

  8. battery amps

    its just a craftsmen 400A ac/dc clamp meter,,,, positive cable connected to battery post as well tha negative cable was connected also

  9. battery amps

    should i have any amp reading at the positive battery cable when motor not running?

  10. melted 30 amp fuse

    well he happend to be in his eighties also he happend to be my dad, he old i should have made myself more clear so im blameing me , and it lookks like i succeded in toasting my electrical system

  11. melted 30 amp fuse

    yes bagman thanks , i will check all that , this weekend , i did test the regulater/rectifier and one tested bad so i bought a used one , but i will check these other things you mentioned,, i do remember one time i left driving lights on and it wouldnt start so i got a jump and the guy started...

  12. melted 30 amp fuse

    in the manual it says use diode mode on multimeter to check regulater/rectifier, the question is do i do this with the battery cables connected to battery or dis connected, it is not real clear..... nevermind im a dumbass

  13. melted 30 amp fuse

    is there a way to test it or should i just replace it

  14. melted 30 amp fuse

    Yes i have thought about bringing back to original state and i could do it but it would cost me a new wiring harnes which i can find at pinnwall cycle parts for a reasonable price , the problem is getting to all the little plugs getting them apart and plugging in the new one sounds easy , but...

  15. melted 30 amp fuse

    i had pulled the starter, the main wire looked ok no sign off wire getting hot , with all the lights on and motor running im pulling 23 amps, motor running all lights off pulling about 18 amps,,,,,,

  16. melted 30 amp fuse

    ok been a few weeks since i been able to check the wirring out on this bike , here is what ihave ..E.B relays connected to battery,driving lights connected to battery, PC-8 fuse panel conected to battery, ignition toggle switch connected to un switched terminal on the PC-8 fuse panel,, i have...

  17. melted 30 amp fuse

    checkd H-4 plug behind headlights all is well , took hi lo beam switch apart all is well there allso, aint gotta clue whats causing it ,

  18. melted 30 amp fuse

    i will check it out this weekend thanks

  19. melted 30 amp fuse

    no i havent done that, why would swapping relays make a difference ? dont have the coupler, i orderd the rocket specific relays which dont have a coupler it came with H 4 plugs which install inside the headlight bowles

  20. melted 30 amp fuse

    yes i tried high and low beam , gets warm with low beam hot with high beam
Back
Top