Search results for query: *

  1. TURBO200R4

    Video on greasing rear needle bearing

    i have dent/seal pullers and what you can do is put washer with a nut on the end of it. you insert the washer (a little smaller than the seal) so you are using about 30 percent pull on the seal and that usually saves the seal in case u can not buy one. if there is a spring on the seal (and it...
  2. TURBO200R4

    Leaving cam cover off overnight?

    this info is a little late to help you but may help someone in the future. i do a lot of transmission pan gaskets so when you have a rubber type gasket it helps to have a sanded type surface to hold that gasket in place like when we get a chrome pan we always do a sand job on it so the gasket...
  3. TURBO200R4

    Leaving cam cover off overnight?

    just my 2 cents i would try to measure those clearances because if you know that most of them are at the high side of the clearance then you are probably good for 30,000 miles on the other hand if some are close to the minimum clearance then you would be good to correct them . just for the...
  4. TURBO200R4

    Lights, dash but no spinny spinny.

    you have been messing with these problems for a about three months what a bummer. i suspect the problem is on a purple wire that makes aq junction under the tank and there is a cure for this problem/corrosion it is called the @Rocket Scientist relay cure and has had success several times. if you...
  5. TURBO200R4

    Leaving cam cover off overnight?

    Ĺpĺlllĺ
  6. TURBO200R4

    Hello everyone!

    Welcome from Tucson Arizona USA
  7. TURBO200R4

    Triumphant Return

    Welcome from Tucson Arizona USA
  8. TURBO200R4

    2007 Classic Carpenter Dreaded Click

    lets give the credit to @Rocket Scientist i am sure that he deserves the credit from what has been posted. i was helping another guy and fixed his problem with a similar fix. there is a bad wire on the bikes and you/we bypassed that wire an so far that bad wire has not come back to bite us in...
  9. TURBO200R4

    Lamda sensor

    I have a lot of info on a lambda sensor but no part number.
  10. TURBO200R4

    2014 roadster parting out

    seems like i have been busy with the shop work that i have not checked it out i also figure it blowed the guides. all of the exhaust valves are open and bent. i would like to get that motor fixed and in my 07 before i am to old to ride. edit i think that is a good idea and not much work i would...
  11. TURBO200R4

    New to the Rocket 3

    welcome from Tucson Arizona USA
  12. TURBO200R4

    2014 roadster parting out

    The whole front assy has been sold sorry
  13. TURBO200R4

    2014 roadster parting out

    what is a
  14. TURBO200R4

    possible newbie lead on a 2007 Rocket.

    plus 1
  15. TURBO200R4

    Hooop

    welcome from Tucson Arizona USA
  16. TURBO200R4

    Front Tire Choices

    So what brand of tires have you tried
  17. TURBO200R4

    2007 Triumph Rocket Classic cooling fan relay part # & interchangeability

    The diode elimina notes the voltage spike and the resistor would lower it i think. Chrysler vehicles on a lot of their ecu's'electronic control units pcm's power control modules tcm's transmission control modules do not use the diode but monitor the voltage spike (guessing about 40 or 50...
  18. TURBO200R4

    Remove TFT cluster to fit Evotech Quadlock mount?

    Regular or metric allens?
  19. TURBO200R4

    Front Tire Choices

    i might be able to road test one of those in a couple of months
  20. TURBO200R4

    Front Tire Choices

    I have a friend that used them on a rocket towing a trailer they were a good tire for that. and he occasionally ran it up to 100mph. i would not worry about hi speed but that is just me. i worry more about lost height i had a shorter tire and was dragging the floorboard all the time. just...
Back
Top