Search results for query: *

  1. TURBO200R4

    backfire on a r3 possible?

    Welcome from Tucson Arizona USA tell us about yourself pictures of the bike
  2. TURBO200R4

    Hello from Mesa AZ

    welcome from Tucson Arizona USA
  3. TURBO200R4

    My turn for the battery problem.

    the thing about the 30/40 amp relay it does not handle the load of the starter it activates the starter solenoid then the starter contacts take the heavy amp draw about 150 amps or so depending on bike condition the starter solenoid may be close to 30/40?
  4. TURBO200R4

    Asymmetrical front tire wear

    i personably do not like stuff in my wheels but if it balances the tire that might be a plus as i doubt that most do not get a proper balance.
  5. TURBO200R4

    2.5 not starting after washing

    i still tell a few customers to look under the hood at night to see the fireworks ps sometimes you can hear it.
  6. TURBO200R4

    Asymmetrical front tire wear

    long long time ago i would wear out the right front tire doing you turns to go to yard sales. :roll:
  7. TURBO200R4

    2.5 not starting after washing

    Never gave it much thought over fifty years. My friend had a 58 corvette and every time he went through a puddle the distributor (with points capacitor rotor and cap ) would crap out out do you have an idea on what happens?
  8. TURBO200R4

    Another Exhaust Thread (Vandemon Headers) with Installation Pictures

    Maybe they do not want me jolly green giant turning it three and one half turns.
  9. TURBO200R4

    2.5 not starting after washing

    Did it ever start
  10. TURBO200R4

    Hello near Bishops Stortford. Buying.

    Welcome from Tucson Arizona USA
  11. TURBO200R4

    Mass air sensor

    Plus 1 If you can locate that empty connector and your air temp sensor fits that might be the answer to the problem which you think that you have.
  12. TURBO200R4

    Early 2.5 with 30,000+ miles - anything to be aware of?

    A gal ran in to me and flipped my Durango on its back like a turtle so time to replace. I took a scanner with me and ran a check on it . With the scanner you can tell if it has passed all of the drive cycles and you might not have a a check engine light come with an expensive repair. I...
  13. TURBO200R4

    Hill Hold feature

    its design was for stop signs/stop lights a shield between the pipes and the module if you will be abusing it
  14. TURBO200R4

    Mass air sensor

    this thread seems to me that it goes all over the place i am going to be blunt so do not get your feelings hurt i am talking about the air temperature sensor only that fits the connector in this picture checking the air temperature sensor the best to worst ways 1st my way lol do not...
  15. TURBO200R4

    ****ed Gear Position Switch

    i just use what ever the component uses trans transfluid motor motor oil ect don't think it would work for Kevin lol
  16. TURBO200R4

    New to R3

    Welcome from Tucson Arizona USA
  17. TURBO200R4

    Any Riders In Switzerland

    Welcome from Tucson Arizona USA
  18. TURBO200R4

    Red Line at Startup

    thanks what a great compliment can i use this for my avatar ?
  19. TURBO200R4

    Mass air sensor

    i do not know what you are asking but i will give you some answers some has already been answered. that is the air intake sensor which was originally in the air box when someone installed your filters so a filter is installed over it to keep it clean and usually placed between filter #1 and...
  20. TURBO200R4

    Red Line at Startup

    While tps is a good possibility for high revs and the tps sensor is made so it will not jam the throttle I am leaning towards the gismo (do not have the foggiest idea what it is called) is stuck. Now the gismo is located on the front and the idle adjustment controls the primary throttle plates...
Back
Top