Steff's latest activity
-
Steff replied to the thread 2005 Rocket 3 front wheel spacers.9 and 12. Front Wheel - Rocket III & Classic Triumph ROCKET III CLASSIC & ROADSTER -
Steff replied to the thread Suggestions for rear darkside.I'm open to try new ideas. This, though, is illegal over here.
-
Steff replied to the thread FRONT MASTER CYLINDER REBUILD KIT.Well, all done. It flew through the road test today, with the front brake at 98% efficient. Not bad for a first-time noob. Still, if you...
-
If you got some air out of the banjo you probably have air trapped in the pump piston area. If you still have the 4-position lever...
-
Steff replied to the thread Bleeding Brakes.Not on this model. Anyway, I purged the bango bolt. It seems to have made some difference. Not what I'm used too, though.
-
Didnt read it to the bottom just seen it was in the 2.5 section and figured thats what it was. I'd go with bad master cylinder. Thats...
-
Steff replied to the thread Bleeding Brakes.As mentioned, mine is a Gen 1 and is nothing like that.
-
Steff replied to the thread Bleeding Brakes.No there aint
-
There is a bleeder inside the break fluid resivour you can bleed. You do it just like normal, pull the brake lever, open the bleeder...
-
The spongy feeling at the lever is air in the system. Here's another trick I've used. Take a squirt bottle spritzer and rubber band...
-
Steff replied to the thread Bleeding Brakes.I've left the lever pulled in tonight. But I tried this before which made no difference. I'll go back to it on Friday; I've had enough...
-
Steff replied to the thread Bleeding Brakes.None on it.
-
Steff replied to the thread Bleeding Brakes.An old post I know. Just doing my fronts, and no matter what procedure I follow, the brakes do not feel really firm. I've tried reverse...
-
Always complete your thought to avoid confusion, "Hun pass me the hammer, I have a stripped pilot jet...."
-
Steff replied to the thread FRONT MASTER CYLINDER REBUILD KIT.Sure, always booted through life. Hun, pass me the hammer.
