mo8414's latest activity
-
-
mo8414 replied to the thread Hello from Ohio!.Welcome to the forum from MI
-
mo8414 replied to the thread Lube the splines....Yea the AI generated answer to most questions is wrong in some way. I've had it tell me the spindle nuts on my f250 should be torqued to...
-
I was told the part number T3201277 is a Stud: M12 ENC SLV. The ENC part stands for encapsulated and the SLV stands for Silver. I'll...
-
mo8414 replied to the thread Lube the splines....I don't think it comes with the nut since its not listed as coming with the nut and when you look up the diagram for the stud, it never...
-
mo8414 replied to the thread Lube the splines....Making that jig was a good idea. That takes a lot of the hard work out of the job. I'll probably make one next time I do it. Glad to...
-
Took it for a wee ride down the road, just to make sure I'd done everything up and to check for the noise. Only go to about 30kph and no...
-
Thanks guys. i cleaned up the studs and put some blue loktite on them. Went back together in about 3 minutes by myself. That jig holds...
-
mo8414 reacted to Tracy Bennett's post in the thread Aftermarket Fuel Line Connection Replacement? with
Like.
Well, Napa has the 5/16 45°, and it was $13. There's no rabbit hole on the interwebs, but it's 4 days away, better than the 3 weeks for... -
mo8414 replied to the thread Lube the splines....That makes a lot of sense. It's a lot less wear and tear on the aluminum female threads since in theory, the studs are not supposed to...
-
The drive shaft will flop around when you have it disconnected and while trying to re-engage it with the final drive. I doubt that is...
-
mo8414 replied to the thread Torx Hatred.That freeze off penitrating oil actually works pretty good, key is to keep spraying it for a good bit you let it get cold so use a rag...
-
mo8414 replied to the thread Lube the splines....It would probably work but you got to ask your self why they didnt just use bolts if securing it like that was good enough. I couldn't...
-
mo8414 reacted to rick danger's post in the thread Bike power button not working anymore apparently... with Like.
a lot of weird stuff can happen with a bad battery. I'd try a new one. even if you take a known good one out of your lawn mower or...
-
Blaming the wife has worked for me for 35 years:cool::p:roll: