Recent content by kipper

  1. kipper

    New

    Welcome from Scotland , inlet broke on collector box ? do you mean catalytic converter . Sure i've got one lying about if you need one. Got custom pipe on my bike
  2. kipper

    R3111 2006 Gearbox

    When you consider the number of rockets sold I don't think it's a common prob ,sure it's happened to a few unlucky owners including some of our esteemed members on here . I've never been paranoid bout it myself but it's not nice when it happens . I notice that nearly every one it happens to...
  3. kipper

    electical problem

    Thats some good info herman just what I needed ,was going by manual as that was my first reference .i'll certainly be following your test methods know you have plenty experience workin out this **** .I'll let you know how I get on , probably sat when I'm off work .
  4. kipper

    electical problem

    today switched bike on with relays removed clocks lit up and done sweep . removed ecu checked pins all good . checked relay connector blocks ,good . So done some tests according to manual . P560 code test Got bat voltage at pin A20 . tests for code 1231 . pin b2 to ground reading o/l .fuel...
  5. kipper

    Show us Your ..... Bikes.

  6. kipper

    About to own a Rocket 3 (2015 model)

    I'm 5' 6" an 71 you'll handle it no problem .Welcome from Scotland
  7. kipper

    electical problem

    Thanks for your suggestions guys all good points to help solve the problem . Was workin today so no time to look . Herman fuse 30 looks good also fuse 6 which supplies power to management relay power on both sides .Itomis good battery holding 12.8v terminals are clean and tight. Atomsplitter...
  8. kipper

    electical problem

    agree with you bout ignition throwing P560 tried switching relays also
  9. kipper

    electical problem

    fitted new ignition switch still had no power . pulled fuel and management relays looked ok switched ignition on and clocks came to life . switched off an put management relay back ,switched on and all good. put fuel relay back in and every thing shut down . no voltage to ignition switch...
  10. kipper

    electical problem

    Yes got power on both wires also tried swappin relays
  11. kipper

    Have a nice day!

    Welcome from Scotland . Nice lookin bike
  12. kipper

    electical problem

    I''ve got a problem ,thought I had bad ignition switch . No power . Today got power and was able to connect tune ecu , threw fault codes P1231 an P560 disconnected connector A at ecu an reconnected cleared codes switched ignition back on an still got P1231 short to fuel pump relay . Manual...
  13. kipper

    Floppy gear selector

    I stand corrected . Been a while since I had broken detent spring. your right guys .
  14. kipper

    Floppy gear selector

    Check the detent spring on gear selector. Pull the clutch cover an have a look before you remove the engine .
  15. kipper

    Oil Change Issue

    You sure you got the correct plug for oil tank ,it should have an o ring on it.
See more
Back
Top