Recent content by chadster54321

  1. chadster54321

    Bike has several codes after fuse blew

    Well waiting time it is i guess. I called a different dealer who i wish wasnt two hours away cause he was super helpful. I told him the abs code that was showing. Thats not even in their service manual apparently. But I tried doing a key switch clear he told me to try and nothing changed. I had...
  2. chadster54321

    Bike has several codes after fuse blew

    Wires are all repaired and all the other engine lights are off. Bike hardly has miles on it so I don't understand what is going on with this. Maybe that code is preventing the cruise control from coming on? Should I spray some electrical cleaner on the sensor? Keep in mind none of this was an...
  3. chadster54321

    Bike has several codes after fuse blew

    Hold on just checked again. ABS has an error code
  4. chadster54321

    Bike has several codes after fuse blew

    I forgot to reply and thought I did. No I dont see anymore codes. Today I opened up the left cruise control cluster and removed just the back part. I dont feel too comfortable with tiny screws and small delicate parts to go further... But from what I saw its nothing obvious that I can see...
  5. chadster54321

    Bike has several codes after fuse blew

    Im at work right now so soon as I get home ill recheck to see if any more codes are stored
  6. chadster54321

    Bike has several codes after fuse blew

    Before all this happened it was fine. So yes it was working
  7. chadster54321

    Bike has several codes after fuse blew

    See im not getting a green light i think its something to do with where the switch is mounted keeps moving all over the place. Its been like this since I've got the bike but I wouldn't be suprised if something in there is screwed up from the housing being loose like it is
  8. chadster54321

    Bike has several codes after fuse blew

    No Unless im doing something wrong? Just test drove it and tried several times. Is there a confirmation that it works?
  9. chadster54321

    Bike has several codes after fuse blew

    You're awesome bro thank you!
  10. chadster54321

    Bike has several codes after fuse blew

    So question all the lights went off and bike is running great but cruise control still aint working? Is there a certain procedure I need to do through tune ecu?
  11. chadster54321

    Bike has several codes after fuse blew

    Yes and you gave me the idea as well as the codes to maybe just try tracing some wires to the abs system in the rear. So thank you.
  12. chadster54321

    Bike has several codes after fuse blew

    Issue was found... so I traced the abs wire on the rear on a whim. The wire on the other side that the wheel speed sensor attaches to that attaches to the tire hugger was damaged. Looks like when I did the mod for the excedra I didn't pull the slack back and the tire ripped the wire apart...
  13. chadster54321

    Bike has several codes after fuse blew

    Thanks for the information
  14. chadster54321

    Bike has several codes after fuse blew

    Explain limp home mode? Its got plenty of power
  15. chadster54321

    Bike has several codes after fuse blew

    I cant remember im at the bar currently. But no other wires were damaged. It was only the vandemon harness wire that was pinched.
See more
Back
Top