Google translation:
kathalisator replaced by blank spacer Day folks, I'm new here so sorry if I make mistakes.
I have a rocket 3 from 2005 with 8,000 miles on the counter just a new thing.
There are now under this sport exhausts look the same as the original only internally they are different.
I have a used RVS kathalisator replacement can get on the Internet and want this build this engine can just or should there be something adapted with the software?
I've read that you should let the engine idle run without gas to give until the fan appreciation as about 10 to 15 min.
Then drop off and he resett themselves, and that's all or more adapted with the software?who can help me with eg d/
As I read this, you have replaced the catbox with a converter, and have Triumph TOR exhausts, and want to know whether you need to retune?
The best way to go would be to have a new tune put into the ECU with either tuneboy, power commander or tune ecu software, but in the meantime, use the Triumph 12 minute tune to reset your adaptives.
Using no throttle, start the engine from cold, wait until you hear the radiator fan start up, then time 12 minutes without touching anything. After 12 minutes, turn off using the ignition key.