hombre
Nitrous
- Joined
- Dec 31, 2006
- Messages
- 1,021
Here's my "chewed" SC outrigger bearing problem from a couple months back. I neglected to re-locktite the 3 set screws, and they backed out on the dyno... and were promptly chewed and spit by the SC pulley. This is the offset bearing that seals the crank extension where it exits the front case. All you SC guys that have your front case removed for other repairs... be forewarned! Loctite the 3 set screws or suffer the same fate! Not cheap at 120 GBP, and a 2 month wait to be fabricated... as it's not inventoried by TTS.