Search results

  1. JKrull66

    Want to Buy Russell day long seat

    Figured I would post again to see if one out there. In Texas would need the Heavy Spring one. Thanks, John
  2. JKrull66

    Want to Buy Russell seat & Classic Floor Boards

    Got rails today still need a seat.
  3. JKrull66

    Want to Buy Russell seat & Classic Floor Boards

    T2083008 LH Back ordered
  4. JKrull66

    Want to Buy Russell seat & Classic Floor Boards

    ordered rails from fowler one is backordered hope they find one. Still looking for seat. John
  5. JKrull66

    Want to Buy Russell seat & Classic Floor Boards

    Thanks for the replies. I would need the heavy spring seat. That is a nice one tho. On the rails I checked at Bike Bandit, which gets supplies from dealer stock and said they could not get. will check directly. Was hoping some were laying around... John
  6. JKrull66

    Want to Buy Russell seat & Classic Floor Boards

    I have a 2006 Standard R3, I have a corbin Seat and Standard floorboards, but looking for a Russell seat for a big guy... and the lower classic floor boards. On the floor boards really just need the rails as the boards are the same part number. The Classic Kit numbers were A9758081 & 8083. Rails...
  7. JKrull66

    Greeting from West Texas! It's been awhile!

    Hello from Midland Tx. A couple r3s here. Enjoy!
  8. JKrull66

    Looking for a good place to Mod tranny

    All good, wish I could find the paperwork. Have run out of places to look. I know it was more than those pieces.
  9. JKrull66

    Looking for a good place to Mod tranny

    Looks like 6 gears to me 2nd input 3rd 4th input 2nd 3rd 4th 5th output. don't see dog ring.
  10. JKrull66

    Looking for a good place to Mod tranny

    If I remember right I paid a reduced rate of around 300.00 for the upgrade. and then bought another 800.00 worth of stuff but could be getting mixed up. Oldtimers setting in!
  11. JKrull66

    Looking for a good place to Mod tranny

    Went out and found what I could (2011) cant seem to locate paperwork found all sorts of it for other stuff.
  12. JKrull66

    Looking for a good place to Mod tranny

    Yes but in second when it popped out and whacked it. Made quite a commotion at the time...
  13. JKrull66

    Looking for a good place to Mod tranny

    Will have to look and see. I know there are gears shifting fork and other parts I had them replace every thing to do with those two gears, when it popped out it slammed against another gear and broke it or went in two gears not sure. After the repairs it never would stay in second at 1/4 power...
  14. JKrull66

    Looking for a good place to Mod tranny

    Did you take them the cases w gears installed? or just the parts?
  15. JKrull66

    Looking for a good place to Mod tranny

    Yes it does at least its spost to
  16. JKrull66

    Rocket Monster mods finally done

    What Shield did you use on the exhaust. I have an 06 with aero also and stock plastic looks funky. Thanks, John
  17. JKrull66

    Looking for a good place to Mod tranny

    I have a 2006 standard black engine turbo bike and have found second to be a weak spot for me. I grenaded one tranny including oil pumps. I had it fixed at a dealer in PA. When I was working out there. They had it forever and it never has stayed in second even w moderate power since I got it...
  18. JKrull66

    R 3 Rider in Midland Tx.

    I was in the seismic side of it for 30 yrs Now I am a DJ spinning Karaoke until that side of it picks up again.
  19. JKrull66

    R 3 Rider in Midland Tx.

    Hello all, Got a couple R3s here in Midland. Thought I would join in on your forum. I have been a R3 owner since 06 when I got my first Bike a used 05 Cardinal Red. I have had it a several rallies all over the US. In 11 I ran across a Black Turboed 06 in Baltimore while out that way working...
  20. JKrull66

    Gear Position sensor 06 R3

    Thanks, checked and all was fine with the sensor, I was not getting a good ground when testing before. It was the plunger stuck in the shaft not comming out enough for contact. Not sure what was binding up. Tried to remove a little shaft material right around the plunger on the end, also tried a...
Top
AdBlock Detected

We get it, advertisements are annoying!

Ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of R3Owners. For the best possible site experience please take a moment to disable your AdBlocker for R3Owners.Net.

I've Disabled AdBlock