Search results for query: *

  1. oteczdmitriy

    How To Close The Gap

  2. oteczdmitriy

    How To Close The Gap

    As well as the slots on the muffler itself.
  3. oteczdmitriy

    How To Close The Gap

    What you're looking for is here.
  4. oteczdmitriy

    12 Minute Tune

    Do not touch throttle at all during procedure....That's what I mean. I got the answer earlier.
  5. oteczdmitriy

    12 Minute Tune

    Without touching the throttle, let the engine run for 12 minutes before turning on the radiator cooling fan. How did you do it?
  6. oteczdmitriy

    Lights, dash but no spinny spinny.

    I have experience when loading a map from Tuneecu to the Triumph Speedmaster is interrupted. The bike wouldn't start. The computer was connected to the ECU from the third or fourth time. I have nothing against the Android version of Tuneecu, but in my opinion it is too capricious with the 2300...
  7. oteczdmitriy

    Lights, dash but no spinny spinny.

    https://www.r3owners.net/resources/tuneecu-v2-5-5.38/
  8. oteczdmitriy

    Lights, dash but no spinny spinny.

    If the download is not completed, you can disassemble and reassemble the entire motorcycle, this will not help. Take a laptop with Windows, Tuneecu, Lonelec cable, battery charger, DO NOT PULL OUT THE FUSE ON THE HEADLIGHTS (in certain cases Tuneecu does not connect), download the map and only...
  9. oteczdmitriy

    Recommend Tune for 2013 Roadster ABS fitted with Ramair and Cat Delete

    The above tuning is perfect for Ramair, K&N, and all straight-through pipes.
  10. oteczdmitriy

    Recommend Tune for 2013 Roadster ABS fitted with Ramair and Cat Delete

    20355 Baseline Dyno Tune 2011 - Thanks Martin_Brighton_Uk Pod Filters, Staintune Mufflers and Crossover Balanced F and L tables Decel pop added Modified AFR throughout the range. You must - repeat must reset your TPS and ISCV as per my notes... 2011 2011 R3R Tors Ramair with more fuel and less...
  11. oteczdmitriy

    Recommend Tune for 2013 Roadster ABS fitted with Ramair and Cat Delete

    The Roadster has catalysts in its OEM mufflers. Tuning with Ramair will give you a lot of fuel that will clog your catalyst. This is not how it works.
  12. oteczdmitriy

    Triumph Rocket III Roadster 2004 mods

    With these changes on the motorcycle, the original map will have a lean mixture, decel popping, a hot motorcycle feeling, and low fuel consumption (not your case), and I'm sure the map on your motorcycle has been tuned.
  13. oteczdmitriy

    Triumph Rocket III Roadster 2004 mods

    Triumph Rocket 3 Original models with ramair air filter, triple TORS silencers and cat delete. Rev Limit: 6800rm Speed Limiter: 299kph Fuel up to E10 Minimum 95 RON (89 RON/MON) fuel HansO tweaks from r3owners.net to help cure popping on... HansO R3 early models with ramair cat delete, TORS and...
  14. oteczdmitriy

    Triumph Rocket III Roadster 2004 mods

    Tuneecu..
  15. oteczdmitriy

    Gears not engaging, after being rough with the gear shifter.

    It doesn't take long to disassemble a motorcycle, and it only takes one day if you take your time.
  16. oteczdmitriy

    Gears not engaging, after being rough with the gear shifter.

    The first photo might be confusing. Or am I missing something?
  17. oteczdmitriy

    Gears not engaging, after being rough with the gear shifter.

    The front part does not need to be disassembled. The rear part, including the rear swingarm, wheel, fender, and air filter box (to release the wires from the bottom of the engine), must be removed
  18. oteczdmitriy

    Gears not engaging, after being rough with the gear shifter.

    Another way, if you're not in a hurry, is to do the work yourself, without a lift or friends. You'll need a rack to store all the motorcycle parts)
  19. oteczdmitriy

    Gears not engaging, after being rough with the gear shifter.

    Triumph was too lazy to come up with a flywheel puller. The puller is without a hammer, in the picture.
  20. oteczdmitriy

    Gears not engaging, after being rough with the gear shifter.

    The puller you need and hammer
Back
Top