Search results for query: *

  1. atomsplitter

    Sump bolt question

    If the sump pan had been previously removed, was it reinstalled with thread locker? Sump bolts are only tightened to 12Nm so some thread locker wouldn't hurt.
  2. atomsplitter

    Crazy ignition skip under load

    If it's fuel, a pressure gauge will determine pump output pressure, however it won't tell you if the filter is starving it under load. The ignition coil would be another area; I had one go out on my 99 Trophy 1200 and that failure wouldn't even let it start.
  3. atomsplitter

    Technical Specifications for Rear Disc / Rotor T2027017

    If you can contact the company that might be a starting point, otherwise you're left with removing your existing unit and taking its measurements. Another option is to remove the rear disc, take it to a machine shop and have the 'waves' cut into it match the fronts. Personally, I would just...
  4. atomsplitter

    2026 Fall Ride, Harrison, Arkansas. October 7-12.

    If I attend it will mean I'm staying in a VRBO (again). There was a nifty unit about 20 miles from Eureka Springs toward Rogers I stayed in. Not sure what my plans are at this point, stay tuned.
  5. atomsplitter

    Shift Assist Training?

    If it's working maybe, you are doing it right.............
  6. atomsplitter

    Technical Specifications for Rear Disc / Rotor T2027017

    It doesn't appear they make a rear disc. You might look at the Galfer rear disc or other makes.
  7. atomsplitter

    Crazy ignition skip under load

    Rev limiter???????????
  8. atomsplitter

    Hello from Wichita Kansas.

    Greetings from sunny North Texas. You're in my old stomping grounds, lived in Kansas from 1974 to 2017. In April head up to Cassoday on the first Sunday of the month. There are some curves around that area.
  9. atomsplitter

    Hello from Tennessee

    Greetings from sunny North Texas.
  10. atomsplitter

    Negative cable location.

    You can just chase the black lead from the battery to where it connects to the frame. You are correct, the wire to the starter's post is positive, the starter case is grounded so current flows from the battery thru the starter to ground. If the ground point on the frame is dodgy, you'll have...
  11. atomsplitter

    2022 Triumph Rocket3 Gt

    The suspension from the factory isn't set for your weight. You'll have to adjust the preload up until you sitting on the bike compresses the rear spring maybe 25mm or (more or less). That's your "static sag" setting. I reduced my compression damping all the way and only a couple turns in on...
  12. atomsplitter

    Oil sweating next to kick stand??

    Good question..........
  13. atomsplitter

    Hello from GTA

    Greetings from the sunny and fairly mild climes of North Texas.
  14. atomsplitter

    Newbie wanting to purchase r3!

    I don't think it, I know it. I met IDK some years ago in Topeka Kansas when he was returning to Maryland and his old Rocket III had about 220,000 miles on it. Those original bikes had 8:1 compression ratios (tractor engines), the Gen 2 bikes are higher compression but still under stressed.
  15. atomsplitter

    Newbie wanting to purchase r3!

    It depends on what mission statement you intend, long haul all day or just blasting around for some fun. The motor will last a quarter million miles, so age and mileage on the motor (properly serviced) won't affect the reliability. You might be comfier on a GT since the pegs can be adjusted...
  16. atomsplitter

    New to R3 Owners Group

    Greetings from sunny North Texas. Enjoy those miles of smiles for years to come (otherwise known as 'permagrin').
  17. atomsplitter

    Hello from Massachusetts

    Greetings from the sunny climes of North Texas. Have fun modding your ride.
  18. atomsplitter

    2013 touring starting issues

    Also check your ground from the battery is solid, clean and tight. The amps from the battery go back to the battery thru the ground point on the frame, if it's weak you'll only get a click because the amps can't be passed thru the circuit.
  19. atomsplitter

    Woolich Racing one of Pros in tuning world has released product for Rocket 2.5

    Based on the verbiage for the second unit ($746) that's the complete package. "This package includes everything you need to start tuning your 2023-2025 Triumph Rocket 3 with our Log Box K v3 and Zeitronix ZT-3 Wideband O2 Sensor."
  20. atomsplitter

    Hello from Sydney, Australia.

    Greetings from sunny North Texas. Enjoy those new wheels, just be careful your right wrist doesn't write checks your body has to cash......
Back
Top