Search results for query: *

  1. atomsplitter

    Asymmetrical front tire wear

    Just don't use that goo if you have the TPMS installed.
  2. atomsplitter

    Drat

    I did, and I did. Thanks.
  3. atomsplitter

    Drat

    I finally managed to scuff the right foot peg 'bank angle indicator' this morning while out riding. Sadly I was going 0 mph when it occurred. I'm sure it's much more thrilling to scrape that little babbin going around a corner or sharp bend than it is to watch the bike fall over when the motor...
  4. atomsplitter

    Brake Bleeding using Tune ECU

    The procedure is for bleeding the brakes through the ABS modulator, it's the same procedure whether you replace the ABS modulator or not. The only delta might be back bleeding if the system hasn't been opened. As to Hill Hold, that actuates when the FRONT lever is squeezed REGARDLESS of rear...
  5. atomsplitter

    Brake Bleeding using Tune ECU

    I'm curious about your view of "integrated" since the front brake lever applies pressure to the rear caliper? I'm using the term as a broadly based engineering concept, perhaps a better term would be combined braking system: Web definition: Motorcycle integrated brakes, often referred to as...
  6. atomsplitter

    Hello near Bishops Stortford. Buying.

    Thanks. Then the answer is: https://www.autotrader.co.uk/bikes/motorcycles/triumph/rocket-iii?refresh=true
  7. atomsplitter

    Brake Bleeding using Tune ECU

    Any particular reason why? Works on my other ABS Triumphs. UPDATE: When confused (like I usually am) I consulted the work shop manual and found on page 1218 the procedure for dealing with installation of the ABS modulator. The important steps are these: 1. Position the ABS modulator onto...
  8. atomsplitter

    Heat Shielding Experiment

    Well my new Motocomposites heat shields are on and I noticed they offset from the header about 1/4" more than the OEM metal shields. They are foil backed so my guess is they won't explode into flame. If they can get the furnace temperature down to just mildly unpleasant from its open pit roast...
  9. atomsplitter

    Brake Bleeding using Tune ECU

    Yes. You'll need to navigate to Tests and Adjustments. Here's a video on how to do it:
  10. atomsplitter

    How to add mid pegs with front peg controls without buying midpeg mounts

    That's because they ride these kind of bikes every day: Both of these bikes will out corner my Rocket, the RS almost pulls as hard as my Rocket too, but neither one of them has everything my Rocket does.
  11. atomsplitter

    Asymmetrical front tire wear

    I use a static balancer myself. My brother uses a ball bearing style balancer (Centramatic) on his Goldwing and swears by it.
  12. atomsplitter

    Early 2.5 with 30,000+ miles - anything to be aware of?

    Prepare to be disappointed. The amount of 'wrench time' on these bikes is usually limited to adding farkle and bling, not doing repairs or maintenance.
  13. atomsplitter

    Asymmetrical front tire wear

    I have my rebound at minimum. Not sure what availability of Amazon you have, but Dyna Beads can be ordered through them. You can also check eBay there are vendors there as well...
  14. atomsplitter

    2.5 not starting after washing

    Likely the distributor wires were leaking assuming the distributor cap was water tight. If you pop the hood open with the motor running in the dark (at night), with very old distributor wires you can watch the wires arcing to ground some of the voltage (dazzling little light show) due to cracks...
  15. atomsplitter

    For Sale Hate to do it, but there comes a time

    I"m sure you can get it sold. Kinda funny tho, I'm 72 and just bought a 2023 GT. Course I also have smaller lighter bikes too. Good luck with your endeavors.
  16. atomsplitter

    2.5 not starting after washing

    Being the atom splitting nit picker that I am, please everyone note for future reference that water cannot 'ground' anything. Water has VERY poor conductivity. What can cause grounding is stuff IN the water like soap, minerals, salts and a raft of chemicals. The 1240 Megawatt main generator...
  17. atomsplitter

    TPMS light on R3 GT Consol

    If the ECU doesn't register an input then the TFT shouldn't either. Glad you got it sorted.
  18. atomsplitter

    Hello near Bishops Stortford. Buying.

    Greetings from sunny North Texas. You'll have to identify where "here" is. There are probably more available in the USA than Jakarta.
  19. atomsplitter

    Hill Hold feature

    It occurs to me that the operation of the Hill Hold and the Hold on my Lexus are very similar. To the time aspect A1A brings up, the way Lexus dealt with it was to time out the Hold feature by automatically engaging the car's parking brake. Found this out while stopped at a RR crossing and the...
  20. atomsplitter

    Remap?

    When I think "mapping" it's changing air/fuel ratios on a table. The ETV settings are simply a percentage of throttle at a given RPM in a table. It is remapping to the extent any changes have to be downloaded to the ECU as a reflash, however the AF, L, etc tables aren't affected, just how...
Back
Top