Search results for query: *

  1. r3badboy

    Purchasing radiator cap for a 2005 Rocket 3

    Most of the caps I've come across that leak are because the 2 tabs bend down a bit over time if they're taken off a few times. Get pliers or tap those 2 taps up & it will fit tighter & stop leaking. Pushing down on the cap when putting back on helps.
  2. r3badboy

    What’s the last thing you bought for your rocket…

    Corbin bags & personal plate $1500nzd, sold the plate straight away for $1000nzd so corbin bags cost $500nzd/$296usd...Best score yet 😁🚀
  3. r3badboy

    Remove stepper code and TPS code permanently

    Cool thankyou ☺️👍🚀
  4. r3badboy

    Remove stepper code and TPS code permanently

    Is that 1/2 watt resistors or 3 watt as in earlier post, cheers
  5. r3badboy

    Remove stepper code and TPS code permanently

    I get 8.2 ohms on the criss cross both ways on stepper & 12.55 on the plug both ways....
  6. r3badboy

    Remove stepper code and TPS code permanently

    Ok cheers, will give that a go 👍 I'm guessing you removed second butterfly's...
  7. r3badboy

    Remove stepper code and TPS code permanently

    Hi RS, I'm having the same problem with stepper motor. Tried everything I know & it's bugging me now! Could you explain how you wired the resistors in thanks. & does this mean there is no need for the stepper motor & second tps anymore?? Many thanks 😊
  8. r3badboy

    How Long Have You Owned Your Rocket

    February 2006 bought new, still have it, over 100,000 k's. Got 4 other rockets...bit of an addiction going on 😅🚀🚀🚀🚀🚀
  9. r3badboy

    Drive Shaft

    Yes there's one in the kit also 👍🚀
  10. r3badboy

    Drive Shaft

    I think the engine is an 04, someone painted it black. At this stage it's only a spare engine as i have bought another with some front end damage & that's an 05. If i put the 04 engine into anything I will take another look & change as i have a brand new torsion upgrade kit with bearings & case...
  11. r3badboy

    Drive Shaft

    I could see the torsion bearing in that pic, it was not sealed that side & the other end was double sealed.
  12. r3badboy

    Drive Shaft

    Got it up & running ☺️🚀 Can't seem to upload a short video...says it's too large? It's only 15 seconds 🤷‍♂️
  13. r3badboy

    Drive Shaft

    Update: after taking clutch out I found the thin gear change return spring had popped off, so I have all gears now & no need to split engine. Being a supposedly 09...but is a silver engine that's been painted black (someone did a swap at some stage) I also took the torsion damper off to check...
  14. r3badboy

    Drive Shaft

    Yes looking that way, will give me something to do over the xmas holidays 🎅🚀
  15. r3badboy

    Drive Shaft

    No, there's no evidence of that would of happened, there is slight movement back a forth but seems normal to me 🤔
  16. r3badboy

    Drive Shaft

    Update: Engine turns over, took the plugs out to make it easier (had been burning nicely). Took Plenium off & looked through throttle boddies at valves, they look brand new on top, no blackening at all. Will put an endoscope into spark plug holes tomorrow. Gearbox: it's stuck in gear. The gear...
  17. r3badboy

    Drive Shaft

    Rolled it, it had a flat tyer & 2 broken shocks. I took wheel off one of my rockets & 2 spare shocks with me, just in case, changed them over & put cable ties on the clutch. Couldn't get it out of gear as the leaver on the gear change shaft was a bit stripped but shaft seems ok. Had to rock it a...
  18. r3badboy

    Drive Shaft

    Back end took most of the hit...
  19. r3badboy

    Drive Shaft

    Will do....resting now 😅
  20. r3badboy

    Drive Shaft

    Got it on the trailer & back home now, will update when I get to work on it 👍🚀
Back
Top