Search results

  1. sleeves

    TPS and ISCV

    Or this
  2. sleeves

    TPS and ISCV

    Sorry for the slow response not internet at home at mo. Bin the evap canister as recommended here. You dont need any parts and can use the hoses that you remove and link them all or put bolts in the hoses temporarily. Dont stress too kuch about the evap can now though but do get rid of it. The...
  3. sleeves

    TPS and ISCV

    If its only one cylinder way off balance, but the other two are good, I'd suspect an air leak on the cylinder, map hoses, off, lose, or cracked. 530vs800 is a big difference. Check them next as no amount of resetting will fix if this is the case.
  4. sleeves

    Handlebar ideas

    As above, I went for Rivco Risers then some Apes, got it sorted. It was the wrist angle just not quite right for me too cutting circulation. But us humans come in a vast range of shapes so do as above and work outa good height and pullback on bars. Above is soynd advice.
  5. sleeves

    Chinese Adaptives

    I recently purchased some brandname ripoff Chinese technology from Aliexpress and after i placed the order i got an email asking if i wanted the ripped off brands logo printed on it? Hilarious, gear was rubbish btw. However my knockoff Daymakers are stunningly good better than any headlights...
  6. sleeves

    For All Of Those Who Keep Putting Off Their Purchase of a Rocket . . .

    Or two, or three?
  7. sleeves

    Weird madness

    Suspect ignition switch does it turn off with the red kill switch on the bars?
  8. sleeves

    Help!!!!

    I have one of the Dakota below that I fitted to my 05, got it SH off Mittzy for a bike I am rebuilding put it on my rider as I liked it so much. Hooded Speedometer/ Tachometer Information Center Quality is really good. Does more than the stock instrument cluster and saved my butt on my last...
  9. sleeves

    Low enough

  10. sleeves

    I know I'm a sign nut.

  11. sleeves

    Moving to a Standalone ECU

    Theres things you cannot access/adjust via TECU or PVC piggybacks, ones the fuel "squirt" whenever you suddenly twist the throttle, that would be good to play round with. I think the fuel choke for starting is another? Theres probably a lot more
  12. sleeves

    Over heating

    My bike used to randomly stop with an overtemp fault but it wasnt actually hot. I contacted guy who I purchased bike off (was 3 years old but only 600miles on it, go figure) he said he had same problem and had new radiator, radiator hoses, temp sensor etc replaced under warranty by stealership...
  13. sleeves

    Moving to a Standalone ECU

    No more wildly off than an old chronometric speedo that just sort of waves in the wind, I can get a warrant of fitness with that, and another mate used a digital bicycle speedo on a chop and THAT was OK! GPS speedo sorry no sir, go figure
  14. sleeves

    Moving to a Standalone ECU

    I found out recently from a mate that builds Hot Rods that GPS speedos are not allowed over here to get a WOF. We though this was odd when they are probably more accurate than a number of speedos on bikes I have owned. Also have wondered about alternative fuel management systems in the past as...
  15. sleeves

    I dont like chrome

    Also any cheap-as heat-gun but with a temp control is best, like a hair dryer but don't try and use it as one;).
  16. sleeves

    I dont like chrome

    Yes they make a Matt wrap and also a carbon fiber wrap, problem we found with the carbon fiber wrap is when fitting/applying it you stretch the material, this stretches the pattern and makes lining it up a PIA, we gave up. For a while we had a free supply of it and the young guys at work were...
  17. sleeves

    I dont like chrome

    I have changed a lot of stuff, and if you want to get rid of the chrome for little expense, 3M wrap is the way to go, watch some youtube vids, a heatgun and a little practice and away you go. If chrome becomes fashionable (i.e chrome prices drop) you can just peel it off
  18. sleeves

    How To: Add Pressure Input for PC-V

    Now who can spot the R3 TPS matchup? ;):D Hi Ishrub I tried to find/source an alternative TPS a while back without success in fact I found a chinese website that did nothing but TPS units, there were around 30 pages of them, no luck. The TPS is a Keihin unit and is also fitted to some single...
  19. sleeves

    TuneEcu issue

    This probably doesnt help but my crappy garage laptop runs on Vista and a late version of Tune ECU and I've never seen THAT before, use it quite regularly to. I do keep it off the internet as much as possible. Dont think thats the TECU program. I really don't like Vista but its been fine for...
  20. sleeves

    How To: Add Pressure Input for PC-V

    You will be very pleased with this, I dithered about getting one for ages, its very useful.
Back
Top