Recent content by sycotchacano

  1. intermittent loss of electrical similar to turning off the ignition switch.

    Owl, thanks for the info. It seems like that is pretty common according to many comments here. So, is there a kit to relocate the switch?

  2. intermittent loss of electrical similar to turning off the ignition switch.

    Roadster, 11500 miles. When turned on the ignition switch I got nothing. I touched the wiring harness going to the switch it got a connection right away. Then gas gauge showed empty and then wiggled the harness to the ignition again and it showed full as it should. Does anyone have any...

  3. Handle Bar risers for 2011 R3 Roadster

    I finally had time to try the ROX risers as suggested earlier. After re-routing the cables and front brake hydraulic line to the rear of the Tripel tree instead of the stock position that they all are in (front) of the triple tree. And trimming the side fram panels a bit to allow the cables...

  4. Handle Bar risers for 2011 R3 Roadster

    Thanks, cr0ft. I will look into that suggestion.

  5. Handle Bar risers for 2011 R3 Roadster

    anyone have any coments or suggestions or experience with this?

  6. Handle Bar risers for 2011 R3 Roadster

    Can you send a picture of the risers installed?

  7. Handle Bar risers for 2011 R3 Roadster

    Rivco apparentyly will not work I called Rivco. I was told that they have tried a couple of time (and once with a Triumph Dealer) to make the risers they have available for the Standard to fit a Roadster and they just will not. Any other ideas?

  8. Handle Bar risers for 2011 R3 Roadster

    did you have to replace any cables or wiring harness?

  9. Handle Bar risers for 2011 R3 Roadster

    I will give that a try. Thanks.

  10. Passenger back rest?

    I love the R3 Roadster however, Triumph really needs to wake up and see what Harley has learned about accessories. they are worth much more than motorcycles in sales revenue and customer loyalty. I am very disappointing in the availability of custom parts and accessories for Triumph. Hell...

  11. Corbin Fairing Alternative

    I have contacted a manufacturer in SE Kansas, USA that is making a great fairing for the Touring R3 and will get busy on one for the Roadster if they get enough interest. All you Roadster owners that would like an alternative to the $1500 Corbin send them a note. look up...

  12. Handle Bar risers for 2011 R3 Roadster

    Any ideas on risers for the roadster without cable and wiring harness replacement?

  13. Handle Bar risers for 2011 R3 Roadster

    Any ideas on risers for the roadster without cable and wiring harness replacement?
See more
Back
Top