Recent content by Sam

  1. Sam

    Oil coming out of the crankcase breather

    Hey Mittzy! My boosted one has same issues, how did you fix glazing? Talcum in inlet while revving 2.5k or just good long ride after thick oil and correct breather?
  2. Sam

    Oil coming out of the crankcase breather

    Hey Mittzy! How did you fix the glazed bores? Thick oil and rode it hard or talcum bpowder in the inlet?
  3. Sam

    Rocket stuck in top (5th) gear and now making grinding noise... 240HP

    All taken on board, seems the course of action is laid out for me :)
  4. Sam

    Rocket stuck in top (5th) gear and now making grinding noise... 240HP

    Also, what power is your rig putting out mate?
  5. Sam

    Rocket stuck in top (5th) gear and now making grinding noise... 240HP

    From memory @warp9.9 instructed me to ensure these were orientated this way last build. It seems to be consistent for most gearbox builds.
  6. Sam

    Rocket stuck in top (5th) gear and now making grinding noise... 240HP

    This is consistent with my findings last time and I shall be possibly changing the whole output shaft this time also. I'll measure the old one as the depth of the snap ring groove seemed too shallow for my liking.... I'm a fitter machinist by trade but gearboxes aren't my forte' it seems.
  7. Sam

    Rocket stuck in top (5th) gear and now making grinding noise... 240HP

    Hey mate, any idea how much taper or undercut they put on them? Never undercut the dogs on a box of this size so I have no idea how much would be ideal.
  8. Sam

    Rocket stuck in top (5th) gear and now making grinding noise... 240HP

    See attached oil analysis, taken and tested 200km prior to failure. Interesting stuff :)
  9. Sam

    Rocket stuck in top (5th) gear and now making grinding noise... 240HP

    Initially I thought the issue was due to the setup of the control and foot boards fitted. You could not get your boot under the shift leaver when at (close to) factory position, and when it was setup high enough to fit your boot underneath it the leaver would have to move back and forward rather...
  10. Sam

    Rocket stuck in top (5th) gear and now making grinding noise... 240HP

    Cheers for all the love fellow Rocket owners! Got back on the bike shortly after surgery with 40 staples in my stomach ahahaha nothing was stopping me getting out there riding the big girl!!! Then BOOM! There goes the gearbox again...... FFS stuck in top gear this time, EXACTLY the same symptoms...
  11. Sam

    Rocket stuck in top (5th) gear and now making grinding noise... 240HP

    @3Katz Hey mate, I won't be attending this year as I was severely unwell recently resulting in major surgery.... nearly 7 days in ICU and 40 odd staples... Not pleasant at all. The big girl has been unofficially scrutineered, and is prepped and ready to go! Unfortunately I am not... Looks like...
  12. Sam

    Want to Buy Carbon Dry Japan Flyscreen

    Hey guys! Really keen to find a carbon dry "angry eyes" fly screen, or similar for my rocket! If I cannot source one I will most likely mold up my own =] Cheers, Samuel.
  13. Sam

    Rocket stuck in top (5th) gear and now making grinding noise... 240HP

    Found bugger all Warp.... After swapping 1 thing at a time I initally saw no change and the fault was still present. Measured absolutely everything with a multimeter etc to no avail..... In the end the fault misterously disappeared after I swapped all the coil packs and injectors to different...
  14. Sam

    Rocket stuck in top (5th) gear and now making grinding noise... 240HP

    What's the worst that could happen ahahahahah I could die I suppose, but at least I'll be a very happy man doing it :) Best case in my mind is another catastrphic mechanical failure, I'll just strip it down again, buy a heap of beer, and fix the ****box ;). It's all made real easy when we have...
  15. Sam

    For Sale For Sale - 2010 R3 Roadster Accessories

    What's your price shipped to 3844, victoria, australia.
Back
Top