RUN666's latest activity
-
RUN666 replied to the thread Succion when opening gaz tank....I had the same problem as you after changing my air filter to install a DNA... pinched air intake pipe and, in addition, assembly of the... -
RUN666 replied to the thread Front tire removal..In France we have a proverb that says: "if you brake you're a coward, but if you don't brake you're an idiot..."
-
RUN666 replied to the thread DNA or OEM Air Filter?.All my bikes have reusable air filters...objectively, it doesn't seem to make much difference compared to the original, contrary to what...
-
RUN666 replied to the thread Front tire removal..I absolutely disagree with you...if you leave the calipers in place it's a real pain to reassemble the wheel while aiming to slide the...
-
RUN666 replied to the thread Front tire removal..The brake calipers absolutely must be removed otherwise you will not be able to remove the wheel. For the axle it is a 19 mm male BTR...
-
RUN666 replied to the thread Asymmetrical front tire wear.I conclude that the steering is not centered simply by noticing the asymmetrical wear of the tire... Add the engine's overturning torque...
-
RUN666 replied to the thread Asymmetrical front tire wear.The offset I measured is between the bottom of the fork and the disc collar. Take a good look at your bike and you'll see, without...
-
RUN666 replied to the thread Asymmetrical front tire wear.Yes, on most motorcycles except that here the spacers are the same length so you can't get them wrong...
-
RUN666 replied to the thread Asymmetrical front tire wear.Well, after removing the front wheel, here are the results: - The guy who tightened the front wheel axle didn't apply the correct torque...
-
-
I saw on a different forum where someone over torqued a front axle and crushed one of the spacers. That is probably not the case here...
-
RUN666 replied to the thread Asymmetrical front tire wear.Yes, I also saw that the two spacers were identical on the original parts list and I will do it soon because, as the front tire has...
-
RUN666 replied to the thread Asymmetrical front tire wear.Given that the bike comes from the Triumph dealership, did they fit the wrong part or make a mistake during assembly then !
-
RUN666 replied to the thread Asymmetrical front tire wear.You are absolutely right and, even if this explanation seems logical to me, if the other Rockets apparently do not have this problem it...
-
RUN666 replied to the thread Asymmetrical front tire wear.ok so, Since I have never had this wear on any of my other motorcycles (Harley, Ducati, Speed Triple etc.), I will favor the explanation...
